使用Python测试Ping主机IP和某端口是否开放的实例
作者:若苗瞬 发布时间:2022-01-07 13:14:47
标签:Python,Ping,主机IP,端口
使用Python方法
比用各种命令方便,可以设置超时时间,到底通不通,端口是否开放一眼能看出来。
命令和返回
完整权限,可以ping通,端口开放,结果如下:
无root权限(省略了ping),端口开放,结果如下:
完整权限,可以ping通,远端端口关闭,结果如下:
完整权限,可以ping通,本地端口关闭,结果如下:
完整权限,不能ping通(端口自然也无法访问),结果如下:
pnp.py代码
#!/usr/bin/python
#name pnp.py
#ping and port
#coding:utf-8
import os, sys, socket, struct, select, time
ICMP_ECHO_REQUEST = 8 # Seems to be the same on Solaris.
socket.setdefaulttimeout(4)
#first argument
host=sys.argv[1]
#second argument
port=int(sys.argv[2])
#socket try connect
def PortOpen(ip,port):
print( '\033[1m*Port\033[0m %s:%d' %(ip,port)),
s=socket.socket(socket.AF_INET,socket.SOCK_STREAM)
try:
s.connect((ip,port))
s.shutdown(2)
print( '\033[1;32m.... is OK.\033[0m' )
return True
except socket.timeout:
print( '\033[1;33m.... is down or network time out!!!\033[0m' )
return False
except:
print( '\033[1;31m.... is down!!!\033[0m' )
return False
def checksum(source_string):
"""
I'm not too confident that this is right but testing seems
to suggest that it gives the same answers as in_cksum in ping.c
"""
sum = 0
countTo = (len(source_string)/2)*2
count = 0
while count<countTo:
thisVal = ord(source_string[count + 1])*256 + ord(source_string[count])
sum = sum + thisVal
sum = sum & 0xffffffff # Necessary?
count = count + 2
if countTo<len(source_string):
sum = sum + ord(source_string[len(source_string) - 1])
sum = sum & 0xffffffff # Necessary?
sum = (sum >> 16) + (sum & 0xffff)
sum = sum + (sum >> 16)
answer = ~sum
answer = answer & 0xffff
# Swap bytes. Bugger me if I know why.
answer = answer >> 8 | (answer << 8 & 0xff00)
return answer
def receive_one_ping(my_socket, ID, timeout):
"""
receive the ping from the socket.
"""
timeLeft = timeout
while True:
startedSelect = time.time()
whatReady = select.select([my_socket], [], [], timeLeft)
howLongInSelect = (time.time() - startedSelect)
if whatReady[0] == []: # Timeout
return
timeReceived = time.time()
recPacket, addr = my_socket.recvfrom(1024)
icmpHeader = recPacket[20:28]
type, code, checksum, packetID, sequence = struct.unpack(
"bbHHh", icmpHeader
)
if packetID == ID:
bytesInDouble = struct.calcsize("d")
timeSent = struct.unpack("d", recPacket[28:28 + bytesInDouble])[0]
return timeReceived - timeSent
timeLeft = timeLeft - howLongInSelect
if timeLeft <= 0:
return
def send_one_ping(my_socket, dest_addr, ID):
"""
Send one ping to the given >dest_addr<.
"""
dest_addr = socket.gethostbyname(dest_addr)
# Header is type (8), code (8), checksum (16), id (16), sequence (16)
my_checksum = 0
# Make a dummy heder with a 0 checksum.
header = struct.pack("bbHHh", ICMP_ECHO_REQUEST, 0, my_checksum, ID, 1)
#a1 = struct.unpack("bbHHh",header) #my test
bytesInDouble = struct.calcsize("d")
data = (192 - bytesInDouble) * "Q"
data = struct.pack("d", time.time()) + data
# Calculate the checksum on the data and the dummy header.
my_checksum = checksum(header + data)
# Now that we have the right checksum, we put that in. It's just easier
# to make up a new header than to stuff it into the dummy.
header = struct.pack("bbHHh", ICMP_ECHO_REQUEST, 0, socket.htons(my_checksum), ID, 1)
packet = header + data
my_socket.sendto(packet, (dest_addr, 1)) # Don't know about the 1
def do_one(dest_addr, timeout):
"""
Returns either the delay (in seconds) or none on timeout.
"""
delay=None
icmp = socket.getprotobyname("icmp")
try:
my_socket = socket.socket(socket.AF_INET, socket.SOCK_RAW, icmp)
my_ID = os.getpid() & 0xFFFF
send_one_ping(my_socket, dest_addr, my_ID)
delay = receive_one_ping(my_socket, my_ID, timeout)
my_socket.close()
except socket.error, (errno, msg):
if errno == 1:
# Operation not permitted
msg = msg + (
" - not root."
)
raise socket.error(msg)
#raise # raise the original error
return delay
def verbose_ping(dest_addr, timeout = 2, count = 100):
"""
Send >count< ping to >dest_addr< with the given >timeout< and display
the result.
"""
for i in xrange(count):
print "\033[1m*Ping\033[0m %s ..." % dest_addr,
try:
delay = do_one(dest_addr, timeout)
except socket.error, e:
print "\033[1;31m... failed. (%s)" % e
break
if delay == None:
print "\033[1;31m... failed. (timeout within %ssec.)\033[0m" % timeout
else:
delay = delay * 1000
print "\033[1;32m... get ping in %0.4fms\033[0m" % delay
if __name__ == '__main__':
if os.geteuid() == 0:
verbose_ping(host,2,3)
else:
print "\033[1m*Ping\033[0m test must be sudo or root..."
PortOpen(host,port)
print( 'Job finished.')
使用命令方法
使用命令ping就不说了,端口可以用下面的命令。
当时目前telnet基本不用,可能没有telnet客户端了。
测试通常连接不上会等很久,端口连上了也需要通过反馈内容自行判断。
telnet
telnet ip port
$telnet 192.168.234.1
Trying 192.168.234.1...
Connected to 192.168.234.1.
Escape character is '^]'.
......
wget
wget ip:port
$wget 192.168.234.1:21
--2019-03-22 15:42:27-- http://192.168.234.1:21/
正在连接 192.168.234.1:21... 已连接。
已发出 HTTP 请求,正在等待回应... 200 没有 HTTP 头,尝试 HTTP/0.9
长度:未指定
正在保存至: “index.html”
......
SSH
ssh -v ip -p port
$ssh -v 192.168.234.1 -p 21
OpenSSH_7.4p1, OpenSSL 1.0.2k-fips 26 Jan 2017
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: /etc/ssh/ssh_config line 58: Applying options for *
debug1: Connecting to 192.168.234.1 [192.168.234.1] port 21.
debug1: Connection established.
......
curl
culr ip:port
$curl 192.168.234.1:21
220 Serv-U FTP Server v15.1 ready...
530 Not logged in.
......
来源:https://blog.csdn.net/ddrfan/article/details/88743854
![](https://www.aspxhome.com/images/zang.png)
![](https://www.aspxhome.com/images/jiucuo.png)
猜你喜欢
- 静态页面运行代码框你也许见的多了,而动态asp运行代码框你一定很少见到,看看本文吧!保存为runasp.asp运行。账号密码admin,登陆
- 前言实验目的:掌握开发、测试、发布、调用进程间通信的基本方法、工具和流程,理解独立构件体系结构基本原理、结构和特点。掌握使用当今主流云平台来
- python字符串方法分类,字符串是经常可以看到的一个数据储存类型,我们要进行字符的数理,就需要用各种的方法,这里有许多方法,我给大家介绍比
- 如下所示:将不想索引的文件夹设置为Excluded Folders 及设置检索不包括的文件File - Settings - -> P
- 总结了部分所学、所听、所看、所问的一些CSS写作经验,书写高效的CSS - 漫谈CSS的渲染效率,它们与渲染效率及所占用
- 本文实例总结了Python多进程并发与多线程并发。分享给大家供大家参考,具体如下:这里对python支持的几种并发方式进行简单的总结。Pyt
- 一日,遇到一个问题,求上一个月的今天。 最开始我们使用 strtotime(”-1 month”) 函数求值,发现有一个问题,月长度不一样的
- python函数的闭包问题(内嵌函数)>>> def func1():... print ('fun
- 1 作用通过 flask-script 可以以命令的形式,执行 flask 语句。提供向 Flask 插入外部脚本的功能,如 运行一个开发服
- 1. Python中lib、package和module的关系module:以.py为结尾的文件都是模块。package:就是一个带__in
- 新建一个项目 app02在 app02/ 下创建 urls.py:from django.conf.urls import urlfrom
- 本文实例讲述了Python实现读取字符串按列分配后按行输出。分享给大家供大家参考,具体如下:问题:输入一个字符串和一个数字,数字代表分为几行
- 前几天,我们Python猫交流学习群 里的 M 同学提了个问题。这个问题挺有意思,经初次讨论,我们认为它无解。然而,我认为它很有价值,应该继
- python 打印对象的所有属性值:def prn_obj(obj): print '\n'.join([
- 在pycharm使用过程中,对于每次新建文件的编码格式和关于代码编写者的一些个人信息快捷填写,方法如下:1.打开pycharm,选择File
- 要实现标题的功能,总共分四步:1.创建html错误页2.配置settings3.编写视图4.配置url我的开发环境:django1.10.3
- 如何生成斐波那契數列斐波那契(Fibonacci)數列是一个非常简单的递归数列,除第一个和第二个数外,任意一个数都可由前两个数相加得到。用计
- 文件操作是开发中经常遇到的场景,那么如何判断一个对象是文件对象呢?下面我们总结了3种常见的方法。方法1:比较类型第一种方法,就是判断对象的t
- 很实用的过滤重复数据的asp代码,函数如下:<%'**************************************
- 中文文本中可能出现的标点符号来源比较复杂,通过匹配等手段对他们处理的时候需要格外小心,防止遗漏。以下为在下处理中文标点的时候采用的两种方法: