网络编程
位置:首页>> 网络编程>> 数据库>> django生产环境搭建(uWSGI+django+nginx+python+MySQL)

django生产环境搭建(uWSGI+django+nginx+python+MySQL)

作者:Py.qi  发布时间:2024-01-26 03:27:48 

标签:django,生产环境,搭建
目录
  • 1、系统环境,必要知识

  • 2、安装python3.6.5

  • 3、安装Django

  • 4、安装uWSGI

  • 5、安装nginx

  • 6、MySQL安装配置

  • 7、编写一个简单的博客系统

1、系统环境,必要知识


#cat /etc/redhat-release
CentOS Linux release 7.5.1804 (Core)
#uname -r
3.10.0-862.3.2.el7.x86_64

暂时关闭防护墙,关闭selinux:


#systemctl stop firewalld.service
#setenforce 0
#getenforce
Permissive

准备知识:

django:一个基于python的开源web框架。

uWSGI:一个基于自有的uwsgi协议,wsgi协议和http服务协议的web网关

nginx:高性能的代理web服务器

wsgi.py:django项目自带的wsgi接口文件(位于:项目/项目名/wsgi.py)

整个项目流程:

首先客户端通过浏览器访问服务器资源;nginx作为对外服务的端口(80),nginx接收到客户端http请求后会解包分析,如果是静态文件就去配置的静态文件中查找资源并返回给客户端,如果是动态资源,nginx就通过配置文件将请求传递给uwsgi处理,并转发给uwsgi,wsgi根据请求调用django工程的文件和函数,处理后django将返回值交给wsgi,wsgi将返回值进行打包,转发给uWSGI,uWSGI接收到数据后转发给nginx,最终返回给客户端。

2、安装python3.6.5

(1)安装python依赖包


yum -y install zlib-devel bzip2-devel openssl-devel ncurses-devel sqlite-devel readline-devel tk-devel gdbm-devel db4-devel libpcap-devel xz-devel python-devel

(2)安装python


#wget https://www.python.org/ftp/python/3.6.5/Python-3.6.5.tgz
#mkdir -p /usr/local/python356
#tar zxvf Python-3.6.5.tgz
#cd Python-3.6.5
#./configure --prefix=/usr/local/python356
#make
#make install
#ln -s /usr/local/python356/bin/python3 /usr/local/bin/python3
#ln -s /usr/local/python356/bin/pip3 /usr/local/bin/pip3
#pip3 install --upgrade pip  #更新pip
#pip3 install ipython  #安装ipython方便调试

测试安装是否正常:


#python3 -V
Python 3.6.5

#pip3 -V
pip 10.0.1 from /usr/local/python356/lib/python3.6/site-packages/pip (python 3.6)

3、安装Django


#pip3 install django

#ln -s /usr/local/python356/bin/django-admin /usr/local/bin/django-admin

创建项目:


#django-admin startproject mysite

创建app:


#cd mysite/
#django-admin startapp app01

在项目路径下创建模板文件目录(templates)和静态文件目录(static),后面会用到


# cd mysite/
# mkdir templates static

配置setting.py文件,配置允许访问主机名、将APP加入到项目、添加模板搜索路径


# vim mysite/settings.py

ALLOWED_HOSTS = ["*"]  #允许本机所有地址访问

INSTALLED_APPS = [
   'django.contrib.admin',
   'django.contrib.auth',
   'django.contrib.contenttypes',
   'django.contrib.sessions',
   'django.contrib.messages',
   'django.contrib.staticfiles',
   'app01',      #加入app名
]

TEMPLATES = [
   {
       'BACKEND': 'django.template.backends.django.DjangoTemplates',
       'DIRS': [os.path.join(BASE_DIR,'templates')],  #加入模板搜索路径
......
]

在views.py文件中创建视图函数


# vim app01/views.py
from django.shortcuts import render

def index(request):
   return render(request,"app01/index.html")

在templates目录中新建测试模板文件


# mkdir -p templates/app01
# vim templates/app01/index.html

<h1>test django server</h1>

在urls.py文件中建立路由


# vim mysite/urls.py
from django.contrib import admin
from django.urls import path,re_path  #添加
from app01 import views  #添加

urlpatterns = [
   path('admin/', admin.site.urls),
   re_path('^$',views.index,name='index'),  #添加的路由
]

检查配置是否有错误:


# python3 manage.py check
System check identified no issues (0 silenced).

运行测试服务器,测试服务是否正常


# python3 manage.py runserver 0:8000
#在浏览器中测试是否正常显示网页内容
#注意防火墙和selinux是否关闭或允许相关端口访问
#curl 127.0.0.1:8000
<h1>test django server</h1>

4、安装uWSGI

使用python的pip工具包安装:


#pip3 install uwsgi

#ln -s /usr/local/python356/bin/uwsgi /usr/local/bin/uwsgi  #建立软链接
#uwsgi --version  #检查安装成功
2.0.17

先在项目目录下建立一个测试文件:


# vim foobar.py
def application(env,start_response):
   start_response('200 ok',[('Content-Type','text/html')])
   return [b"Hello World"]

然后采用测试脚本方式启动服务:


# uwsgi --http :9000 --wsgi-file foobar.py
#通过浏览器访问http://ip:9000能看到hello world说明成功
#然后停止服务

接下来配置uwsgi部署django服务:


#运行测试服务,--http指定服务端口,--chdir指定django项目目录,--wsgi-file指定项目中的wsgi.py文件
# uwsgi --http :9000 --chdir /opt/mysite/ --wsgi-file mysite/wsgi.py --master --ocesses 4 --threads 2 --stats 127.0.0.1:9191

#通过浏览器http://ip:9000
#如能访问到diango模板中的html文件中的内容就算成功
#我的上面django模板中配置的内容是
test django server

建立uWSGI的配置文件,在django项目中建立uwsgi.ini文件,并配置好django项目,此处使用socket链接,后面通过nginx反向代理


#注意此处的配置指定用户nginx必须存在

[uwsgi]
socket = 127.0.0.1:9090
chdir = /djproject/mysite
module = mysite.wsgi    #这里填的是相对路径
master = true
processes = 2
threads = 2
max-requests = 2000
vacuum = true
daemonize = /djproject/mysite/uwsgi.log
stats = 127.0.0.1:9001
post-buffering = 65535
buffer-size = 65535
harakiri-verbose = true
harakiri = 300
uid = nginx
pidfile = /djproject/mysite/uwsgi.pid

参数说明:

socket:使用套接字链接

http:通过http加端口的方式

wsgi-file:指定加载的wsgi文件

chdir:指定工程的绝对路径,如Django的项目路径

module:指定web应用的入口模块,如Django项目下的wsgi.py接口文件

master:启动主进程

processes:启动进程数

threads:启动线程数

max-requests:最大请求数

daemonize:指定uWSGI日志文件路径

stats:指定状态查询端口,如:127.0.0.1:9001

wsgi-file:指定启动的文件

post-buffering:设置缓冲区

buffer-size:设置缓冲区文件大小

harakiri-verbose:设置超时true为开启

harakiri:设置超时时间

uid、gid:设置用户和组

pidfile:指定启动时的pid文件路径

vacuum = true #当服务器退出的时候自动删除unix socket文件和pid文件

uwsgi信号控制:

HUP     :优雅的重新加载所有进程和配置,同(--reload)一样

TERM:强制重新加载主进程和配置

 INT:立即杀死整个uWSGI;同于:--stop

QUIT:立即杀死真个uWSGI

重新启动实例:


#kill -HUP `cat /tmp/project-mast.pid`

#uwsgi --reload /tmp/project-master.pid

还可以在python程序中使用uwsgi.reload()重新加载

停止服务器:


#uwsgi --stop /tmp/project-master.pid

#kill -INT `cat /tmp/project-master.pid`

编写启动脚本:


#vim /etc/init.d/uwsgi

#!/bin/bash
#this is uwsgi server script

. /etc/init.d/functions

uwsgi=/usr/local/bin/uwsgi
uwsgi_pid=/djangoproject/mysite/uwsig.pid
uwsgi_conf=/djangoproject/mysite/uwsigconf.ini
uwsgi_pn=`ps -ef|grep -v "grep"|grep -c "uwsgi"`
ERVAL=0
start(){
   $uwsgi --ini $uwsgi_conf >& /dev/unll
   ERVAL=$?
   if [ $ERVAL -eq 0 ];then
       action "uwsgid starting ..." /bin/true
   else
       action "uwsgid start is error" /bin/false
   fi
}

stop(){
   $uwsgi --stop $uwsgi_pid >& /dev/null
   ERVAL=$?
   if [ $ERVAL -eq 0 ];then
       action "uwsgid stoping ..." /bin/true
   else
       action "uwsgid stop is error" /bin/false
   fi
}

case "$1" in
   start)
       if [ $uwsgi_pn -ge 5 ];then
           action "uwsgi is running!" /bin/false
       else
           start
           ERVAL=0
       fi
       ;;
   stop)
       if [ $uwsgi_pn -ge 5 ];then
           stop
           ERVAL=0
       else
           action "uwsgi no running!" /bin/false
       fi
       ;;
   reload)
       if [ $uwsgi_pn -ge 5 ];then
           $uwsgi --reload $uwsgi_pid >&/dev/null
           ERVAL=$?
           [ $ERVAL -eq 0 ] && action "uwsgi reloading ..." /bin/true
       else
           action "uwsgi reload error" /bin/false
       fi
       ;;
   restart)
       stop
       sleep 2
       start
       ;;
   *)
       echo $"Usage: $0 {start|stop|restart|reload|status}"
       ERVAL=2
esac
exit $ERVAL

 centOS7 system系统服务脚本:


#cat /usr/lib/systemd/system/uwsgi.service
[Unit]
Description=uwsgi service
After=network.target

[Service]
Type=forking
PIDFile=/run/uwsgi.pid
ExecStartPre=/usr/bin/rm -f /run/uwsgi.pid
ExecStart=/usr/local/python356/bin/uwsgi --ini /djproject/mysite/uwsgi.ini
ExecReload=/bin/kill -s HUP $MAINPID
KillSignal=SIGQUIT
TimeoutStopSec=5
KillMode=process
PrivateTmp=true

[Install]
WantedBy=multi-user.target

centOS7建立system启动脚本后需要加载下:


systemctl daemon-reload

测试服务:


#uwsgi --ini /djproject/mysite/uwsgi.ini    #启动服务

#ps -ef|grep "uwsgi"   #查看进程
root     103596      1  2 16:02 ?        00:00:00 /usr/local/python356/bin/uwsgi --ini /djproject/mysite/uwsgi.ini
root     103598 103596  0 16:02 ?        00:00:00 /usr/local/python356/bin/uwsgi --ini /djproject/mysite/uwsgi.ini
root     103599 103596  0 16:02 ?        00:00:00 /usr/local/python356/bin/uwsgi --ini /djproject/mysite/uwsgi.ini

#netstat -lntp|grep "uwsgi"
tcp        0      0 127.0.0.1:9090          0.0.0.0:*               LISTEN      103596/uwsgi        
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      103596/uwsgi

看上面进程是少了一个主进程,通过systemctl 查看就清楚了:


#systemctl status -l uwsgi.service
● uwsgi.service - uwsgi service
  Loaded: loaded (/usr/lib/systemd/system/uwsgi.service; disabled; vendor preset: disabled)
  Active: active (running) since 五 2018-05-25 16:02:06 CST; 4min 14s ago
 Process: 103593 ExecStart=/usr/local/python356/bin/uwsgi --ini /djproject/mysite/uwsgi.ini (code=exited, status=0/SUCCESS)
 Process: 103591 ExecStartPre=/usr/bin/rm -f /run/uwsgi.pid (code=exited, status=0/SUCCESS)
Main PID: 103596 (uwsgi)
  CGroup: /system.slice/uwsgi.service
          ├─103596 /usr/local/python356/bin/uwsgi --ini /djproject/mysite/uwsgi.ini
          ├─103598 /usr/local/python356/bin/uwsgi --ini /djproject/mysite/uwsgi.ini
          └─103599 /usr/local/python356/bin/uwsgi --ini /djproject/mysite/uwsgi.ini

5月 25 16:02:06 ZPY systemd[1]: Starting uwsgi service...
5月 25 16:02:06 ZPY uwsgi[103593]: [uWSGI] getting INI configuration from /djproject/mysite/uwsgi.ini
5月 25 16:02:06 ZPY systemd[1]: PID file /run/uwsgi.pid not readable (yet?) after start.
5月 25 16:02:06 ZPY systemd[1]: Started uwsgi service.

#通过查看uwsgi的日志,如没报错,就接着下一步,部署nginx

5、安装nginx

这里采用yum安装nginx:


yum -y install nginx

配置nginx反向代理uwsgi服务:


user nginx;
worker_processes auto;
error_log /var/log/nginx/error.log;
pid /run/nginx.pid;

# Load dynamic modules. See /usr/share/nginx/README.dynamic.
include /usr/share/nginx/modules/*.conf;

events {
   worker_connections 1024;
}

http {
   log_format  main  '$remote_addr - $remote_user [$time_local] "$request" '
                     '$status $body_bytes_sent "$http_referer" '
                     '"$http_user_agent" "$http_x_forwarded_for"';

access_log  /var/log/nginx/access.log  main;

sendfile            on;
   tcp_nopush          on;
   tcp_nodelay         on;
   keepalive_timeout   65;
   types_hash_max_size 2048;

include             /etc/nginx/mime.types;
   default_type        application/octet-stream;

# Load modular configuration files from the /etc/nginx/conf.d directory.
   # See http://nginx.org/en/docs/ngx_core_module.html#include
   # for more information.
   include /etc/nginx/conf.d/*.conf;

server {
   listen 80;
   server_name localhost;
   charset     utf-8;
   access_log      /var/log/nginx/nginx_access.log main;
   error_log       /var/log/nginx/nginx_error.log;
   client_max_body_size 75M;

location /static {
       alias /djproject/mysite/static/ckeditor/;  #指定django的静态文件
       }

location / {
       include     /etc/nginx/uwsgi_params;  #加载uwsgi模块
       uwsgi_pass  127.0.0.1:9090;   #所有请求转到9090端 * 给uwsgi处理
       }
   }
}

此处记录下配置uwsgi和nginx套接字通信的坑:

第一个,nginx日志报错:

connect() to unix:///tmp/uwsgi.sock failed (2: No such file or directory) while connecting to upstream ......

可以明明uwsgi配置sock套接字通信在/tmp目录下明明有uwsgi.sock文件,而且/tmp目录是777权限,为什么nginx找不到套接字文件,经过google,百度查资料终于在stackoverflow上找到答案:是因为centOS7系统中/tmp临时目录,使用了命名空间的临时目录,对于每个服务只能访问自己创建的临时文件,所以我们不应该将sock文件放入/tmp目录,而因该放入/run目录下

第二个,uwsgi日志报错:


bind(): Permission denied [core/socket.c line 230]

经过第一个错误折腾,终于可以了,但放入/run目录后,uwsgi启动不了了,权限不够,这个问题解决简单,只需给/run目录,有uwsgi服务用户也就是uid指定的用户有写入权限即可,或者直接给/run目录777的权限但这样不安全。


#chmod o+w /run    #我的解决方法

下面是uwsgi和nginx的配置:


#vim /uwsgi.ini

[uwsgi]
socket = /run/uwsgi.sock    #使用sock文件
chdir = /mysite/myblog
module = myblog.wsgi
master = true
processes = 2
threads = 2
max-requests = 2000
vacuum = true
home = /mysite
daemonize = /var/log/uwsgi/uwsgi.log
stats = 127.0.0.1:9001
post-buffering = 65535
buffer-size = 65535
harakiri-verbose = true
harakiri = 300
pidfile = /run/uwsgi.pid
vacuum = true


#vim /etc/ningx/nginx.conf
...
server {
      ......
       location /static {
       alias /opt/mysite/static;
       }
   location / {
       include /etc/nginx/uwsgi_params;
           uwsgi_pass unix:///run/uwsgi.sock;   #指定sock文件
   }
}
...

6、MySQL安装配置


#下载二进制包安装
wget https://downloads.mysql.com/archives/get/file/mysql-5.5.32-linux2.6-x86_64.tar.gz
tar zxvf mysql-5.5.32-linux2.6-x86_64.tar.gz
mv mysql-5.5.32-linux2.6-x86_64 /usr/local/mysql-5.5.32
ln -s /usr/local/mysql-5.5.32 /usr/local/mysql
useradd -s /sbin/nologin -M mysql
mkdir /mysql/data -p
chown -R mysql.mysql /mysql/data
cd /usr/local/mysql
#添加配置文件和启动脚本
cp support-files/my-small.cnf /etc/my.cnf
cp support-files/mysql.server /etc/init.d/mysqld
#初始化数据库
./scripts/mysql_install_db --user=mysql --basedir=/usr/local/mysql --datadir=/mysql/data/
echo $?

#修改启动脚本路径
sed -i 's#^basedir=#basedir=/usr/local/mysql#g' /etc/init.d/mysqld
sed -i 's#^datadir=#datadir=/mysql/data#g' /etc/init.d/mysqld
chmod +x /etc/init.d/mysqld
#启动和关闭MySQL
/etc/init.d/mysqld start
/etc/init.d/mysqld stop
#方法2:
/usr/local/mysql/bin/msyql_safe &    #后台启动
mysqladmin shutdown  #优雅关闭MySQL服务
#查看运行状态
#netstat -lntup|grep 3306
tcp        0      0 0.0.0.0:3306            0.0.0.0:*               LISTEN      70099/mysqld        

#添加系统自启动
chkconfig --add mysqld
chkconfig --level 345 mysqld on
#添加环境变量
echo "PATH=/usr/local/mysql/bin:$PATH" >> /etc/profile
source /etc/profile

#修改初始化密码
mysqladmin -uroot password '123456'

#建立一个数据库,后面要用到
MySQL [(none)]> create database django;
Query OK, 1 row affected (0.00 sec)

#centOS7下通过epel源yum安装MySQL

# yum install epel-release
# yum -y install mariadb mariadb-devel mariadb-server
# systemctl enable mariadb
# systemctl start mariadb# mysql -e "select version();"
+----------------+
| version()      |
+----------------+
| 5.5.60-MariaDB |
+----------------+

#建立个数据库后面要用到
MariaDB [(none)]> create database django charset 'utf8';
MariaDB [(none)]> grant all on django.* to 'admin'@'127.0.0.1' identified by '123.com';
MariaDB [(none)]> flush privileges;

(1)配置Django链接MySQL:

在setting中,Django默认使用的是sqlite数据库:


DATABASES = {
   'default': {
       'ENGINE': 'django.db.backends.sqlite3',
       'NAME': os.path.join(BASE_DIR, 'db.sqlite3'),
   }
}

修改成MySQL数据库配置:


DATABASES = {
       'default':{
       'ENGINE': 'django.db.backends.mysql',
       'NAME': 'django',
       'USER': 'root',
       'PASSWORD': '123.com',
       'HOST': '127.0.0.1',
       'PORT': '3306',
       }
}

ENGINE : 指定数据库驱动,不同的数据库这个字段不同,下面是常见的集中数据库的ENGINE的写法:


django.db.backends.postgresql  # PostgreSQL  
django.db.backends.mysql       # mysql  
django.db.backends.sqlite3     # sqlite  
django.db.backends.oracle      # oracle

NAME: 指定的数据库名,如果是sqlite的话,就需要填数据库文件的绝对位置
USER: 数据库登录的用户名,mysql一般都是root
PASSWORD:登录数据库的密码,必须是USER用户所对应的密码
HOST: 由于一般的数据库都是C/S结构的,所以得指定数据库服务器的位置,我们一般数据库服务器和客户端都是在一台主机上面,所以一般默认都填127.0.0.1
PORT:数据库服务器端口,mysql默认为3306
HOST和PORT都可以不填,使用默认的配置,但是如果你有更改默认配置的话,就需要填入更改后的
配置完这,下面就需要装python连接mysql数据库的驱动程序,首先,需要安装mysql的开发包


#yum install mysql-devel   #安装MySQL插件
#pip3 install mysqlclient    #安装MySQL驱动

#测试django配置
# python3 manage.py check

环境搭建到此就完成了,下面开始开发项目

7、编写一个简单的博客系统

(1)数据建模,规划博客内容字段


#首先装两个包django-ckeditor、pillow分别用来添加富文本和缩略图用

# pip3 install django-ckeditor pillow

#vim app01/models.py

from django.db import models
from django.utils import timezone  #导入时间模板
from django.contrib.auth.models import User  #导入用户
from ckeditor_uploader.fields import RichTextUploadingField  #导入富文本模板

class blog_articles(models.Model):
   title = models.CharField(max_length=300,verbose_name="文章标题")
   author = models.ForeignKey(User,on_delete=models.CASCADE,related_name="blog_posts",verbose_name="文章作者")
   body = RichTextUploadingField(verbose_name="文章内容")
   description = RichTextUploadingField(verbose_name="文章描述")
   publish = models.DateTimeField(default=timezone.now,verbose_name="发表时间")
   picture = models.ImageField(upload_to="images")  #图片
   class Meta:
       ordering = ("-publish",)   #按时间倒序排列

def __str__(self):
       return self.title   #显示文章标题

(2)配置setting.py


#vim mysite/settings.py

INSTALLED_APPS = [
   'django.contrib.admin',
   'django.contrib.auth',
   'django.contrib.contenttypes',
   'django.contrib.sessions',
   'django.contrib.messages',
   'django.contrib.staticfiles',
   'app01',
   'ckeditor',   #加入模块到项目
   'ckeditor_uploader',  #加入模板
]

LANGUAGE_CODE = 'zh-hans'   #配置中文

TIME_ZONE = 'Asia/Shanghai'  #配置时区

USE_I18N = True

USE_L10N = True

USE_TZ = False #关闭UTC时间

STATIC_URL = '/static/'
STATICFILES_DIRS = [os.path.join(BASE_DIR,"static"),]  #配置静态文件路径

MEDIA_URL = '/media/'  #媒体文件路由
MEDIA_ROOT = os.path.join(BASE_DIR,"static")  #媒体文件路径

STATIC_ROOT = os.path.join(BASE_DIR,"static/ckeditor") #配置收集静态文件路径

CKEDITOR_UPLOAD_PATH = 'uploads/'  #指定媒体上传目录的相对路径
CKEDITOR_IMAGE_GACKEND = 'pillow'  #使用pillow模板启用缩略图功能

#具体的ckedito配置文档:https://pypi.org/project/django-ckeditor/

(3)配置admin.py后台


# vim app01/admin.py

from django.contrib import admin
from .models import blog_articles   #导入数据

admin.site.register(blog_articles)  #加载到后台

(4)配置url.py路由


# vim mysite/urls.py
from django.contrib import admin
from django.urls import path,re_path,include
from app01 import views

urlpatterns = [
   path('admin/', admin.site.urls),
   re_path('^$',views.index,name='index'),
   path(r'ckeditor/',include('ckeditor_uploader.urls'))  #添加ckeditor路由
]

(5)收集静态文件,生成数据并迁移


# python3 manage.py check
# python3 manage.py collectstatic
# python3 manage.py makemigrations
# python3 manage.py migrate
#执行此处会有一个警告信息,需要配置mysql严格模式,在setting.py文件中的DATABASES中的数据引擎中添加以下配置:
'OPTIONS': {
           'init_command': "SET sql_mode='STRICT_TRANS_TABLES'",
       },

(5)创建后台账户并验证后台添加文章


# python3 manage.py creatsuperuser
Unknown command: 'creatsuperuser'. Did you mean createsuperuser?
Type 'manage.py help' for usage.
[root@PJYC7 mysite]# python3 manage.py createsuperuser
用户名 (leave blank to use 'root'): admin
电子邮件地址: admin@admin.com
Password:
Password (again):
密码长度太短。密码必须包含至少 8 个字符。
Bypass password validation and create user anyway? [y/N]: y
Superuser created successfully.

#重启uwsgi和nginx服务
# systemctl restart uwsgi
# systemctl restart nginx

django生产环境搭建(uWSGI+django+nginx+python+MySQL)

django生产环境搭建(uWSGI+django+nginx+python+MySQL)

(6)模板展示文章

修改views.py:


#vim app01/views.py
from django.shortcuts import render,get_object_or_404
from .models import blog_articles

def index(request):    #主页
   blogs = blog_articles.objects.all()
   return render(request,"app01/index.html",{"blogs":blogs})

def center(request,article_id):   #详情页
   article = get_object_or_404(blog_articles,id=article_id)
   pub = article.publish
   return render(request,"app01/content.html",{"article":article,"publish":pub})

建立模板文件:index.html,content.html


# vim templates/app01/index.html

<!doctype html>
<html>
<head>
<meta charset="utf-8">
<title>{% block title %}个人博客{% endblock %}</title>
<meta name="keywords" content="个人博客" />
<meta name="description" content="个人博客模板" />
<link href="/static/ckeditor/css/base.css" rel="external nofollow"  rel="stylesheet">
<link href="/static/ckeditor/css/index.css" rel="external nofollow"  rel="stylesheet">
<script src="/static/ckeditor/js/scrollReveal.js"></script>
</head>
<body>
<div>
  <ul class="cbp_tmtimeline">
  {% for i in blogs %}
  <li>
  <time class="cbp_tmtime"><span>{{ i.publish.month }}-{{ i.publish.day }}</span><span>{{ i.publish.year }}</span></time>
  <div class="cbp_tmicon"></div>
  <div class="cbp_tmlabel" data-scroll-reveal="enter right over 1s" >
   <h2>{{ i.title }}</h2>
   <p><span class="blogpic"><a href="{{ i.id }}" rel="external nofollow"  rel="external nofollow" ><img src="/static/{{ i.picture }}"></a></span>{{ i.description|safe }}</p>
    <a href="{{ i.id }}" rel="external nofollow"  rel="external nofollow"  target="_blank" class="readmore">阅读全文>></a>
      </div>
      </li>
     {% endfor %}
      </ul>
 </div>

# vim templates/app01/content.html
<dev>
<h2>{{ article.title }}</h2>
<p><span class="blogpic"><img src="/static/{{ article.picture }}"></span></p>
<span>{{ article.body|safe }}</span>
</dev>

修改路由:urls.py


from django.contrib import admin
from django.urls import path,re_path,include
from app01 import views

urlpatterns = [
   path('admin/', admin.site.urls),
   re_path('^$',views.index,name='index'),
   path(r'ckeditor/',include('ckeditor_uploader.urls')),
   re_path(r'(?P<article_id>\d)/$',views.center),  #详情页获取ID显示页面
]
#重启uwsgi和nginx服务....

#查看显示页:点击详情页验证!!!

添加后台过滤器:


#vim app01/admin.py

from django.contrib import admin
from .models import blog_articles

class BlogArticlesAdmin(admin.ModelAdmin):
   list_display = ("title","author","publish")
   list_filter = ("publish","author")
   search_fields = ('title','body')
   raw_id_fields = ("author",)
   date_hierarchy = "publish"

admin.site.register(blog_articles,BlogArticlesAdmin)

(7)表单示例

通过template模版与MySQL实现简单表单交互

在app目录下的models文件中创建model类用于生成数据表:


#cat app01/models.py
from django.db import models

# Create your models here.

class userinfo(models.Model):
   name = models.CharField(max_length=32)
   password = models.CharField(max_length=32)
   age = models.IntegerField()
   salary = models.IntegerField()

设置setting.py文件,将app加入到INSTALLED_APPS中:


INSTALLED_APPS = [
       'django.contrib.admin',
       'django.contrib.auth',
       'django.contrib.contenttypes',
       'django.contrib.sessions',
       'django.contrib.messages',
       'django.contrib.staticfiles',
       'app01'
       ]

根据model类创建数据库表:


#cmd进入django项目路径下
#python manage.py migrate #创建表结构,非model类的其他表,django所需要的
#python manage.py makemigrations app名 #做数据迁移的准备
如:python manage.py makemigrations app01 app01是项目中的app名字
#python manage.py migrate # 执行迁移,创建medel表结构

在templages下建立模版文件:


#cat templates/app01/home.html
<!DOCTYPE html>
<html lang="en">
<head>
   <meta charset="UTF-8">
   <title>test</title>
   <style>
   body{
       background-image: url('/static/78556.jpg');
   }
   </style>
</head>
<body>
<form action="" method="post">   #提交数据给自身
     <p><input type="text" name="username"/></p>
     <p><input type="text" name="password"/></p>
     <p><input type="text" name="age"/></p>
     <p><input type="text" name="salary"/></p>
     <p><input type="submit" value="提交"/></p>
</form>
<table border="1">
  <thead>
      <tr>
               <th>用户名</th>
               <th>密码</th>
               <th>年龄</th>
               <th>工资</th>
      </tr>
  </thead>
           <tbody>
               {% for item in data %} #循环获取传入字典数据
               <tr>
                   <td>{{item.name}}</td>
                   <td>{{item.password}}</td>
                   <td>{{item.age}}</td>
                   <td>{{item.salary}}</td>
               </tr>
               {% endfor %}
           </tbody>
       </table>

<h1>this is test file</h1>
<script src="/static/jquery-3.3.1.js"></script>
</body>
</html>

在app下新建视图函数,与数据库交互:

#cat app01/views.py


from django.shortcuts import render
from django.http import HttpResponse
from app01 import models   #引入数据类模版
# Create your views here.

def home(request):   #创建home函数处理请求
 if request.method == "POST":   #判断是否为post提交
   #print(request.POST)
   models.userinfo.objects.create(     #提交表单的数据到数据库
   name = request.POST['username'],
   password = request.POST['password'],
   age = request.POST['age'],
   salary = request.POST['salary'],
)
 data = models.userinfo.objects.all()   #获取数据库数据
 return render(request,'app01/home.html',{'data':data}) #渲染模版文件并传递数据库表给模版

#此处是以post方式提交,需要修改Django项目setting设置中的MIDDLEWARE,将csrf安全机制注销了:


MIDDLEWARE = [
   'django.middleware.security.SecurityMiddleware',
   'django.contrib.sessions.middleware.SessionMiddleware',
   'django.middleware.common.CommonMiddleware',
   #'django.middleware.csrf.CsrfViewMiddleware',
   'django.contrib.auth.middleware.AuthenticationMiddleware',
   'django.contrib.messages.middleware.MessageMiddleware',
   'django.middleware.clickjacking.XFrameOptionsMiddleware',
]

#建立路由:


#cat mysite/urls.py
from django.contrib import admin
from django.urls import path
from app01 import views
urlpatterns = [
   path('admin/', admin.site.urls),
   path('home/',views.home),
]

重新启动uWSGI:


#uwsgi --stop uwsgi.pid
#uwsgi --ini uwsgi.ini

#浏览器访问:http://192.168.146.139/home

#提交数据到数据库后并返回给浏览器客户端

django生产环境搭建(uWSGI+django+nginx+python+MySQL)

虚拟环境搭建实例:


echo 'PS1="[\[\e[32;40m\]\u\[\e[0m\]@\[\e[32;40m\]\h\[\e[0m\]@\[\e[33;40m\]\A\[\e[0m\]\[\e[36;40m\]\W\[\e[0m\]\[\e[35;40m\]<\#>\[\e[0m\]]\\$"' ~/.bashrc
. ~/.bashrc
#配置epel源:
wget -O /etc/yum.repos.d/epel.repo http://mirrors.aliyun.com/repo/epel-7.repo
yum clean all
yum makecache
#按照依赖包
yum install libffi-devel openssl openssl-devel zlib-devel bzip2-devel ncurses-devel sqlite-devel readline-devel tk-devel gdbm-devel db4-devel libpcap-devel xz-devel python-devel

#安装Python3.7
wget https://www.python.org/ftp/python/3.7.0/Python-3.7.0.tar.xz
tar xvf Python-3.7.0.tar.xz
mkdir -p /usr/local/python37
cd Python-3.7.0
./configure --prefix=/usr/local/python37/
make && make install
ln -s /usr/local/python37/bin/python3 /usr/local/bin/python3
ln -s /usr/local/python37/bin/pip3 /usr/local/bin/pip3
pip3 install --upgrade pip

#配置国内python源
mkdir -p ~/.pip
cat > ~/.pip/pip.conf << EFO
[global]
timeout=60
index-url=https://pypi.tuna.tsinghua.edu.cn/simple

[install]
trusted-host=https://pypi.tuna.tsinghua.edu.cn
EFO

#创建虚拟环境
python3 -m venv /mysite
cd mysite/
git clone git://github.com/kennethreitz/autoenv.git
echo 'source /mysite/autoenv/activate.sh' >> ~/.bashrc
source ~/.bashrc
echo "source /mysite/bin/activate" >/mysite/.env

#在虚拟环境中安装Django
pip install django
django-admin.py startproject myblog
cd myblog/

#测试Django
vim /mysite/myblog/myblog/settings.py
ALLOWED_HOSTS = ["*"]

python manage.py runserver 0.0.0.0:8000

#在虚拟环境中安装Uwsgi
pip install uwsgi
#测试uwsgi
#创建测试文件
cat test.py
def application(env, start_response):
start_response('200 OK', [('Content-Type','text/html')])
return [b"Hello World"]

uwsgi --http :9000 --wsgi-file test.py

#使用uwsgi测试django
uwsgi --http :9000 --module myblog.wsgi

#安装nginx
yum install nginx
systemctl enable nginx
systemctl start nginx

#nginx配置django和uwsgi反向代理:
location /static {
alias /mysite/myblog;
}

location / {
uwsgi_pass 127.0.0.1:9000;
include /etc/nginx/uwsgi_params;
uwsgi_param UWSGI_DIR /mysite/myblog;
uwsgi_param UWSGI_MODULE myblog.wsgi;
uwsgi_param UWSGI_ENV /mysite;
}

#contOS7创建系统服务
cat /etc/systemd/system/uwsgi.service
[Unit]
Description=uWSGI Emperor
After=syslog.target

[Service]
ExecStart=/root/uwsgi/uwsgi --ini /etc/uwsgi/emperor.ini
# Requires systemd version 211 or newer
RuntimeDirectory=uwsgi
Restart=always
KillSignal=SIGQUIT
Type=notify
StandardError=syslog
NotifyAccess=all

[Install]
WantedBy=multi-user.target

#uwsgi配置文件:
[uwsgi]
socket = 127.0.0.1:9000
chdir = /root/mysite/myblog
module = myblog.wsgi
master = true
processes = 2
threads = 2
max-requests = 2000
vacuum = true
#home = /root/mysite
daemonize = /var/log/uwsgi/uwsgi.log
stats = 127.0.0.1:9001
post-buffering = 65535
buffer-size = 65535
harakiri-verbose = true
harakiri = 300
pidfile = /run/uwsgi.pid
venv = /root/mysite/.venv

#常用选项:
--http      在指定的地址上添加http端口
--http-socket  使用HTTP协议绑定到指定的UNIX/TCP套接字上
--wsgi-file    加载WSGI文件
--processes    指定进程数
--threads 指定每个进程的线程数
-M --master 启用主进程
--stats  指定状态查询绑定地址端口,如:127.0.0.1:9001
-s --socket  使用默认协议绑定到指定的UNIX/TCP套接字
--chdir:指定工程的绝对路径,如Django的项目路径  
--module:指定web应用的API,如Django项目下的wsgi.py接口文件    
--max-requests:最大请求数
--daemonize:指定uWSGI日志文件路径    
--post-buffering:设置缓冲区
--buffer-size:设置缓冲区文件大小
--harakiri-verbose:设置超时true为开启
--harakiri:设置超时时间
--uid、--gid:设置用户和组
--pidfile:指定启动时的pid文件路径    
--venv  指定python虚拟环境

来源:https://www.cnblogs.com/zhangxinqi/p/9084126.html

0
投稿

猜你喜欢

手机版 网络编程 asp之家 www.aspxhome.com