一文详解如何用GPU来运行Python代码

简介

前几天捣鼓了一下Ubuntu，正是想用一下我旧电脑上的N卡，可以用GPU来跑代码，体验一下多核的快乐。

还好我这破电脑也是支持Cuda的：

$ sudo lshw -C display
 *-display                
      description: 3D controller
      product: GK208M [GeForce GT 740M]
      vendor: NVIDIA Corporation
      physical id: 0
      bus info: pci@0000:01:00.0
      version: a1
      width: 64 bits
      clock: 33MHz
      capabilities: pm msi pciexpress bus_master cap_list rom
      configuration: driver=nouveau latency=0
      resources: irq:35 memory:f0000000-f0ffffff memory:c0000000-cfffffff memory:d0000000-d1ffffff ioport:6000(size=128)

安装相关工具

首先安装一下Cuda的开发工具，命令如下：

$ sudo apt install nvidia-cuda-toolkit

查看一下相关信息：

$ nvcc --version
nvcc: NVIDIA (R) Cuda compiler driver
Copyright (c) 2005-2021 NVIDIA Corporation
Built on Thu_Nov_18_09:45:30_PST_2021
Cuda compilation tools, release 11.5, V11.5.119
Build cuda_11.5.r11.5/compiler.30672275_0

通过Conda安装相关的依赖包：

conda install numba & conda install cudatoolkit

通过pip安装也可以，一样的。

测试与驱动安装

简单测试了一下，发觉报错了：

$ /home/larry/anaconda3/bin/python /home/larry/code/pkslow-samples/python/src/main/python/cuda/test1.py
Traceback (most recent call last):
 File "/home/larry/anaconda3/lib/python3.9/site-packages/numba/cuda/cudadrv/driver.py", line 246, in ensure_initialized
   self.cuInit(0)
 File "/home/larry/anaconda3/lib/python3.9/site-packages/numba/cuda/cudadrv/driver.py", line 319, in safe_cuda_api_call
   self._check_ctypes_error(fname, retcode)
 File "/home/larry/anaconda3/lib/python3.9/site-packages/numba/cuda/cudadrv/driver.py", line 387, in _check_ctypes_error
   raise CudaAPIError(retcode, msg)
numba.cuda.cudadrv.driver.CudaAPIError: [100] Call to cuInit results in CUDA_ERROR_NO_DEVICE

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
 File "/home/larry/code/pkslow-samples/python/src/main/python/cuda/test1.py", line 15, in <module>
   gpu_print[1, 2]()
 File "/home/larry/anaconda3/lib/python3.9/site-packages/numba/cuda/compiler.py", line 862, in __getitem__
   return self.configure(*args)
 File "/home/larry/anaconda3/lib/python3.9/site-packages/numba/cuda/compiler.py", line 857, in configure
   return _KernelConfiguration(self, griddim, blockdim, stream, sharedmem)
 File "/home/larry/anaconda3/lib/python3.9/site-packages/numba/cuda/compiler.py", line 718, in __init__
   ctx = get_context()
 File "/home/larry/anaconda3/lib/python3.9/site-packages/numba/cuda/cudadrv/devices.py", line 220, in get_context
   return _runtime.get_or_create_context(devnum)
 File "/home/larry/anaconda3/lib/python3.9/site-packages/numba/cuda/cudadrv/devices.py", line 138, in get_or_create_context
   return self._get_or_create_context_uncached(devnum)
 File "/home/larry/anaconda3/lib/python3.9/site-packages/numba/cuda/cudadrv/devices.py", line 153, in _get_or_create_context_uncached
   with driver.get_active_context() as ac:
 File "/home/larry/anaconda3/lib/python3.9/site-packages/numba/cuda/cudadrv/driver.py", line 487, in __enter__
   driver.cuCtxGetCurrent(byref(hctx))
 File "/home/larry/anaconda3/lib/python3.9/site-packages/numba/cuda/cudadrv/driver.py", line 284, in __getattr__
   self.ensure_initialized()
 File "/home/larry/anaconda3/lib/python3.9/site-packages/numba/cuda/cudadrv/driver.py", line 250, in ensure_initialized
   raise CudaSupportError(f"Error at driver init: {description}")
numba.cuda.cudadrv.error.CudaSupportError: Error at driver init: Call to cuInit results in CUDA_ERROR_NO_DEVICE (100)

网上搜了一下，发现是驱动问题。通过Ubuntu自带的工具安装显卡驱动：

还是失败：

$ nvidia-smi
NVIDIA-SMI has failed because it couldn't communicate with the NVIDIA driver. Make sure that the latest NVIDIA driver is installed and running.

最后，通过命令行安装驱动，成功解决这个问题：

$ sudo apt install nvidia-driver-470

检查后发现正常了：

$ nvidia-smi
Wed Dec  7 22:13:49 2022      
+-----------------------------------------------------------------------------+
| NVIDIA-SMI 470.161.03   Driver Version: 470.161.03   CUDA Version: 11.4     |
|-------------------------------+----------------------+----------------------+
| GPU  Name        Persistence-M| Bus-Id        Disp.A | Volatile Uncorr. ECC |
| Fan  Temp  Perf  Pwr:Usage/Cap|         Memory-Usage | GPU-Util  Compute M. |
|                               |                      |               MIG M. |
|===============================+======================+======================|
|   0  NVIDIA GeForce ...  Off  | 00000000:01:00.0 N/A |                  N/A |
| N/A   51C    P8    N/A /  N/A |      4MiB /  2004MiB |     N/A      Default |
|                               |                      |                  N/A |
+-------------------------------+----------------------+----------------------+

+-----------------------------------------------------------------------------+
| Processes:                                                                  |
|  GPU   GI   CI        PID   Type   Process name                  GPU Memory |
|        ID   ID                                                   Usage      |
|=============================================================================|
|  No running processes found                                                 |
+-----------------------------------------------------------------------------+

测试代码也可以跑了。

测试Python代码

打印ID

准备以下代码：

from numba import cuda
import os

def cpu_print():
   print('cpu print')

@cuda.jit
def gpu_print():
   dataIndex = cuda.threadIdx.x + cuda.blockIdx.x * cuda.blockDim.x
   print('gpu print ', cuda.threadIdx.x, cuda.blockIdx.x, cuda.blockDim.x, dataIndex)

if __name__ == '__main__':
   gpu_print[4, 4]()
   cuda.synchronize()
   cpu_print()

这个代码主要有两个函数，一个是用CPU执行，一个是用GPU执行，执行打印操作。关键在于@cuda.jit这个注解，让代码在GPU上执行。运行结果如下：

$ /home/larry/anaconda3/bin/python /home/larry/code/pkslow-samples/python/src/main/python/cuda/print_test.py
gpu print  0 3 4 12
gpu print  1 3 4 13
gpu print  2 3 4 14
gpu print  3 3 4 15
gpu print  0 2 4 8
gpu print  1 2 4 9
gpu print  2 2 4 10
gpu print  3 2 4 11
gpu print  0 1 4 4
gpu print  1 1 4 5
gpu print  2 1 4 6
gpu print  3 1 4 7
gpu print  0 0 4 0
gpu print  1 0 4 1
gpu print  2 0 4 2
gpu print  3 0 4 3
cpu print

可以看到GPU总共打印了16次，使用了不同的Thread来执行。这次每次打印的结果都可能不同，因为提交GPU是异步执行的，无法确保哪个单元先执行。同时也需要调用同步函数cuda.synchronize()，确保GPU执行完再继续往下跑。

查看时间

我们通过这个函数来看GPU并行的力量：

from numba import jit, cuda
import numpy as np
# to measure exec time
from timeit import default_timer as timer

# normal function to run on cpu
def func(a):
   for i in range(10000000):
       a[i] += 1

# function optimized to run on gpu
@jit(target_backend='cuda')
def func2(a):
   for i in range(10000000):
       a[i] += 1

if __name__ == "__main__":
   n = 10000000
   a = np.ones(n, dtype=np.float64)

start = timer()
   func(a)
   print("without GPU:", timer() - start)

start = timer()
   func2(a)
   print("with GPU:", timer() - start)

结果如下：

$ /home/larry/anaconda3/bin/python /home/larry/code/pkslow-samples/python/src/main/python/cuda/time_test.py
without GPU: 3.7136273959999926
with GPU: 0.4040513340000871

可以看到使用CPU需要3.7秒，而GPU则只要0.4秒，还是能快不少的。当然这里不是说GPU一定比CPU快，具体要看任务的类型。

来源：https://www.cnblogs.com/larrydpk/p/17093627.html