网站运营
位置:首页>> 网站运营>> 详解CentOS 7.0源码包搭建LNMP 实际环境搭建

详解CentOS 7.0源码包搭建LNMP 实际环境搭建

作者:juestnow  发布时间:2021-05-30 04:51:59 

标签:centos7,lnmp环境搭建

Centos7+Nginx1.11.7+MySQL5.7.16+PHP7.1.0+openssl-1.1.0c

一、linux 系统限制配置

1、关闭系统防火墙    


systemctl stop firewalld.service 关闭防火墙
systemctl disable firewalld.service 禁用防火墙

2、关闭SElinux


sed -i 's/SELINUX=.*/SELINUX=disabled/g' /etc/selinux/config
setenforce 0 selinux 立即生效

二、系统安装约定

软件源代码包存放位置:/usr/local/src

源码包编译安装位置:/usr/local/软件名字

三、下载软件包

1、下载nginx最新稳定版本


wget -P /usr/local/src http://nginx.org/download/nginx-1.11.7.tar.gz

2、下载mysql-boost-5.7.16 带 boost 如果不带源码安装如果网络环境不会可能会出现错误


wget -P /usr/local/src http://cdn.mysql.com/Downloads/MySQL-5.7/mysql-boost-5.7.16.tar.gz

3、下载php-7.1.0版本


wget -P /usr/local/src http://cn2.php.net/distributions/php-7.1.0.tar.gz

4、下载libmemcached-1.0.18


wget -P /usr/local/src https://launchpadlibrarian.net/165454254/libmemcached-1.0.18.tar.gz

5、下载php-memcached


yum -y install git
cd /usr/local/src
git clone -b php7 https://github.com/php-memcached-dev/php-memcached.git

6、下载openssl-1.1.0c


wget -P /usr/local/src https://www.openssl.org/source/openssl-1.1.0c.tar.gz

四、安装编译器及依赖


yum -y insyall epel-release
yum -y install patch gcc gcc-c++ readline-devel zlib-devel libffi-devel \
openssl openssl-devel make autoconf automake libtool bison libxml2 \
libxml2-devel libxslt-devel libyaml-devel python python-docutils \
cmake imake expat-devel libaio libaio-devel bzr ncurses-devel wget \
libjpeg libjpeg-devel libpng libpng-devel freetype freetype-devel \
pcre-devel curl-devel libmcrypt libmcrypt-devel

五、编译安装mysql-boost-5.7.16 方便再次安装创建mysql_install.sh脚本

1、mysql_install.sh内容


#!/bin/bash
#yum update -y
#yum install -y cmake gcc-c++ ncurses-devel gcc make openssl*
#mysql安装脚本
DBDIR='/data/mysql' #mysql数据存储目录
MYSQLDIR='/usr/local/mysql' # mysql安装目录
PASSWD='123456' # mysql root密码 安装完成可远程ip登陆
[ -d $DBDIR ] || mkdir $DBDIR -p
id mysql &> /dev/null
if [ $? -ne 0 ];then
useradd mysql -s /sbin/nologin -M
fi
chown -R mysql:mysql $DBDIR
cd /usr/local/src
tar -xvf mysql-boost-5.7.16.tar.gz
cd mysql-5.7.16
cmake . -DCMAKE_INSTALL_PREFIX=$MYSQLDIR \
-DMYSQL_DATADIR=$DBDIR \
-DSYSCONFDIR=/etc \
-DWITH_INNOBASE_STORAGE_ENGINE=1 \
-DWITH_ARCHIVE_STORAGE_ENGINE=1 \
-DWITH_BLACKHOLE_STORAGE_ENGINE=1 \
-DWITH_READLINE=1 \
-DWITH_LIBWRAP=0 \
-DMYSQL_UNIX_ADDR=/tmp/mysql.sock \
-DWITH_SSL=system \
-DWITH_ZLIB=system \
-DWITH_BOOST=/usr/local/src/mysql-5.7.16/boost/boost_1_59_0 \
-DDEFAULT_CHARSET=utf8 \
-DDEFAULT_COLLATION=utf8_general_ci
if [ $? != 0 ];then
echo "cmake error!"
exit 1
fi
make && make install
if [ $? -ne 0 ];then
echo "install mysql is failed!" && /bin/false
fi
sleep 2
chown -R mysql:mysql $MYSQLDIR
chown -R root:root $MYSQLDIR
cp $MYSQLDIR/support-files/my-default.cnf /etc/my.cnf
echo export PATH=$PATH:$MYSQLDIR/bin:$MYSQLDIR/lib >>/etc/profile
source /etc/profile
cat >> /etc/my.cnf << EOF
character_set_server = utf8
basedir = $MYSQLDIR
datadir = $DBDIR
port = 3306
server_id = 1
socket = /tmp/mysql.sock
explicit_defaults_for_timestamp=true
EOF
sed -i 's/sql_mode=.*/sql_mode=NO_ENGINE_SUBSTITUTION,STRICT_TRANS_TABLES,NO_AUTO_CREATE_USER/g' /etc/my.cnf
 source /etc/profile
 sleep 5
 cd $MYSQLDIR
 cp support-files/mysql.server /etc/init.d/mysqld
 chmod 700 /etc/init.d/mysqld
 mysql_ssl_rsa_setup
 rm -rf $DBDIR
 mysqld --initialize --user=mysql
 if [ $? -ne 0 ];then
echo "install mysql is failed!" && /bin/false
fi
#/etc/init.d/mysqld stop
 mysqld_safe --user=mysql --skip-grant-tables --skip-networking &
 sleep 5
 echo "update user set authentication_string=Password('$PASSWD') where user='root'; flush privileges;" | mysql mysql

echo "set password=Password('$PASSWD'); flush privileges;" | mysql -u root -p$PASSWD --connect-expired-password
 sleep 5
 echo "GRANT ALL PRIVILEGES ON *.* TO root@'%' IDENTIFIED BY '$PASSWD'; FLUSH PRIVILEGES; " | mysql -u root -p$PASSWD
 /etc/init.d/mysqld restart
 if [ $? -ne 0 ];then
echo "install mysql is failed!" && /bin/false
fi
IDSO=`cat /etc/ld.so.conf| grep $MYSQLDIR/lib | wc -l `
if [ $IDSO -eq 0 ];then
echo "$MYSQLDIR/lib" >> /etc/ld.so.conf
ldconfig
fi
chkconfig mysqld on

2、给 mysql_install.sh  可执行权限


chmod +x mysql_install.sh

3、运行mysql_install.sh 


./mysql_install.sh

六、编译安装php7  创建php安装脚本php7_install.sh

1、vim php7_install.sh


#!/bin/bash
if [ $( find / -name mysql | wc -l ) -gt 1 ];then
echo " mysql is install "
else
yum install -y mysql
fi
cd /usr/local/src
tar -xzvf php-7.1.0.tar.gz
cd ./php-7.1.0
./configure \
--prefix=/usr/local/php7 \
--exec-prefix=/usr/local/php7 \
--with-config-file-path=/usr/local/php7/etc \
--with-curl \
--with-freetype-dir \
--with-gd \
--with-gettext \
--with-iconv-dir \
--with-kerberos \
--with-libdir=lib64 \
--with-libxml-dir \
--with-mysqli \
--with-openssl \
--with-pcre-regex \
--with-pdo-mysql \
--with-pdo-sqlite \
--with-pear \
--with-png-dir \
--with-xmlrpc \
--with-xsl \
--with-zlib \
--with-zlib-dir \
--with-mhash \
--with-mcrypt \
--with-openssl-dir \
--with-jpeg-dir \
--enable-fpm \
--enable-bcmath \
--enable-libxml \
--enable-inline-optimization \
--enable-gd-native-ttf \
--enable-mbregex \
--enable-mbstring \
--enable-opcache \
--enable-pcntl \
--enable-shmop \
--enable-soap \
--enable-sockets \
--enable-sysvsem \
--enable-xml \
--enable-zip
make && make install

# 中文php画图取消这个参数,不然会出现乱码
# --enable-gd-jis-conv \

2、给 php7_install.sh 可执行权限


chmod +x php7_install.sh

3、执行 php7_install.sh


./php7_install.sh

4、编译安装libmemcached-1.0.18

vim libmemcached_install.sh


#/!bin/bash
cd /usr/local/src
tar -zxvf libmemcached-1.0.18.tar.gz
cd ./libmemcached-1.0.18
./configure --prefix=/usr/local/libmemcached
make && make install

chmod +x libmemcached_install.sh
./libmemcached_install.sh

5、编译安装php-memcached

vim memcached_install.sh


#!/bin/bash
cd /usr/local/src/php-memcached
/usr/local/php7/bin/phpize
./configure --with-libmemcached-dir=/usr/local/libmemcached \
--with-php-config=/usr/local/php7/bin/php-config \
--disable-memcached-sasl
make && make install

chmod +x memcached_install.sh
./memcached_install.sh

留意编完成生成文件路径


Installing shared extensions:  /usr/local/php7/lib/php/extensions/no-debug-non-zts-20160303/

七、编译安装openssl-1.1.0c

vim openssl_install.sh


#!/bin/bash
#openssl install
cd /usr/local/src
tar -xvf openssl-1.1.0c.tar.gz
cd /usr/local/src/openssl-1.1.0c
./config --openssldir=/usr/local/ssl
make && make install
./config shared --openssldir=/usr/local/ssl
make clean
make && make install
IDSO=`cat /etc/ld.so.conf| grep /usr/local/lib64 | wc -l `
if [ $IDSO -eq 0 ];then
echo "/usr/local/lib64" >> /etc/ld.so.conf
fi
ldconfig

chmod +x openssl_install.sh
./openssl_install.sh

八、编译安装nginx-1.11.7

vim nginx_install.sh


#!/bin/bash
# nginx install
id nginx &> /dev/null
if [ $? -ne 0 ];then
groupadd -r nginx
useradd -g nginx -r nginx
fi
cd /usr/local/src
tar -xvf nginx-1.11.7.tar.gz
cd /usr/local/src/nginx-1.11.7
./configure --prefix=/usr/local/nginx \
--sbin-path=/usr/sbin/nginx \
--conf-path=/etc/nginx/nginx.conf \
--error-log-path=/var/log/nginx/error.log \
--http-log-path=/var/log/nginx/access.log \
--pid-path=/var/run/nginx.pid \
--lock-path=/var/run/nginx.lock \
--http-client-body-temp-path=/var/cache/nginx/client_temp \
--http-proxy-temp-path=/var/cache/nginx/proxy_temp \
--http-fastcgi-temp-path=/var/cache/nginx/fastcgi_temp \
--http-uwsgi-temp-path=/var/cache/nginx/uwsgi_temp \
--http-scgi-temp-path=/var/cache/nginx/scgi_temp \
--user=nginx \
--group=nginx \
--with-http_ssl_module \
--with-http_realip_module \
--with-http_addition_module \
--with-http_sub_module \
--with-http_dav_module \
--with-http_flv_module \
--with-http_mp4_module \
--with-http_gunzip_module \
--with-http_gzip_static_module \
--with-http_random_index_module \
--with-http_secure_link_module \
--with-http_stub_status_module \
--with-http_auth_request_module \
--with-threads \
--with-stream \
--with-openssl=/usr/local/src/openssl-1.1.0c \ # openssl 源码解压路径
--with-stream_ssl_module \
--with-http_slice_module \
--with-mail \
--with-mail_ssl_module \
--with-file-aio \
--with-http_v2_module \
--with-ipv6
mkdir -pv /var/cache/nginx/{client_temp,proxy_temp,fastcgi_temp,uwsgi_temp,scgi_temp}
make && make install

2、给nginx_install.sh可执行权限


chmod +x nginx_install.sh
./nginx_install.sh

九、配置PHP7

/usr/local/php7/lib/php/extensions/no-debug-non-zts-20160303/memcached.so

这个路径是 随机可变的所以要注意

留意变完成生成文件路径

Installing shared extensions:     /usr/local/php7/lib/php/extensions/no-debug-non-zts-20160303/


cd /usr/local/src/php-7.1.0
cp php.ini-production /usr/local/php7/etc/php.ini
cp /usr/local/php7/etc/php-fpm.conf.default /usr/local/php7/etc/php-fpm.conf
cp /usr/local/php7/etc/php-fpm.d/www.conf.default /usr/local/php7/etc/php-fpm.d/www.conf
sed -i "s/user = .*/user = nginx/g" /usr/local/php7/etc/php-fpm.d/www.conf
sed -i "s/group = .*/group = nginx/g" /usr/local/php7/etc/php-fpm.d/www.conf
cp ./sapi/fpm/init.d.php-fpm /etc/init.d/php-fpm
chmod +x /etc/init.d/php-fpm
chkconfig php-fpm on
cat >> /usr/local/php7/etc/php.ini<< EOF
soap.wsdl_cache_enabled=1
max_input_time = 600
max_execution_time = 300
date.timezone = Asia/Shanghai
post_max_size = 32M
memory_limit = 128M
mbstring.func_overload = 1
extension=/usr/local/php7/lib/php/extensions/no-debug-non-zts-20160303/memcached.so
EOF
cat > /usr/local/nginx/html/index.php<<EOF
<?php
phpinfo();
?>
EOF
service php-fpm start

十、配置nginx

1、重命名:/etc/nginx/nginx.conf


mv /etc/nginx/nginx.conf /etc/nginx/nginx.conf.back

2、新建/etc/nginx/nginx.conf


cat > /etc/nginx/nginx.conf << EOF
user nginx;
worker_processes 1;

error_log /var/log/nginx/error.log warn;
pid  /var/run/nginx.pid;

events {
worker_connections 1024;
}

http {
include  /etc/nginx/mime.types;
default_type application/octet-stream;

log_format main '\$remote_addr - \$remote_user [\$time_local] "\$request" '
     '\$status \$body_bytes_sent "\$http_referer" '
     '"\$http_user_agent" "\$http_x_forwarded_for"';

access_log /var/log/nginx/access.log main;

sendfile  on;
#tcp_nopush  on;

keepalive_timeout 65;

#gzip on;

include /etc/nginx/conf.d/*.conf;
}
EOF

3、创建/etc/nginx/conf.d


mkdir -p /etc/nginx/conf.d

4、创建支持php-fpm web nginx配置


cat > /etc/nginx/conf.d/default.conf << EOF
server {
 listen  80;
 server_name localhost;

#charset koi8-r;

#access_log logs/host.access.log main;

location / {
  root /usr/local/nginx/html;
  index index.php index.html index.htm;
 }

#error_page 404    /404.html;

# redirect server error pages to the static page /50x.html
 #
 error_page 500 502 503 504 /50x.html;
 location = /50x.html {
  root html;
 }

# proxy the PHP scripts to Apache listening on 127.0.0.1:80
 #
 #location ~ \.php$ {
 # proxy_pass http://127.0.0.1;
 #}

# pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000
 #
 location ~ \.php$ {
  root   /usr/local/nginx/html;
  fastcgi_pass 127.0.0.1:9000;
  fastcgi_index index.php;
  fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name;
  include  fastcgi_params;
 }
 location ~* ^.+\.(jpg|jpeg|gif|png|bmp)$ {
  access_log off;
  root  opencart;
  expires  30d;
     break;
 }
}
EOF

5、创建nginx启动脚本

vim /etc/init.d/nginx


# chkconfig: 2345 10 90
# description: Start and Stop nginx

PATH=/usr/local/bin:/sbin:/usr/bin:/bin

EXEC=/usr/sbin/nginx
PIDFILE=/var/run/nginx.pid
CONF="/etc/nginx/nginx.conf"
AUTH="1234"

case "$1" in
 start)
   if [ -f $PIDFILE ]
   then
     echo "$PIDFILE exists, process is already running or crashed."
   else
     echo "Starting nginx server..."
     $EXEC -c $CONF &
   fi
   if [ "$?"="0" ]
   then
     echo "nginx is running..."
   fi
   ;;
 stop)
   if [ ! -f $PIDFILE ]
   then
     echo "$PIDFILE exists, process is not running."
   else
     PID=$(cat $PIDFILE)
     echo "Stopping..."
     kill -9 $PID
     PID=$(pidof nginx)
     kill -9 $PID
     rm -rf /var/run/nginx.pid
     sleep 2
     while [ -x $PIDFILE ]
     do
       echo "Waiting for nginx to shutdown..."
       sleep 1
     done
     echo "nginx stopped"
   fi
   ;;
 reload)

$EXEC -s reload
   ;;
 restart|force-reload)
   ${0} stop
   ${0} start
   ;;
 *)
   echo "Usage: /etc/init.d/nginx {start|stop|restart|force-reload|reload}" >&2
   exit 1
esac

6、给 /etc/init.d/nginx 可执行权限


chmod +x /etc/init.d/nginx

7、设置开机启动


chkconfig nginx on

8、启动nginx


service nginx start

十一、测试


[root@QKA169 src]# openssl version  
OpenSSL 1.1.0c 10 Nov 2016
mysql -u root -p123456
mysql> show databases;
+--------------------+
| Database   |
+--------------------+
| information_schema |
| mysql    |
| performance_schema |
| sys    |
+--------------------+
4 rows in set (0.00 sec)
看看是否登陆成功。远程带IP是否登陆成功
mysql -u root -h192.168.1.69 -p123456
mysql> show databases;
+--------------------+
| Database   |
+--------------------+
| information_schema |
| mysql    |
| performance_schema |
| sys    |
+--------------------+
4 rows in set (0.00 sec)

mysql: [Warning] Using a password on the command line interface can be insecure.
Welcome to the MySQL monitor. Commands end with ; or \g.
Your MySQL connection id is 6
Server version: 5.7.16 Source distribution

Copyright (c) 2000, 2016, Oracle and/or its affiliates. All rights reserved.

Oracle is a registered trademark of Oracle Corporation and/or its
affiliates. Other names may be trademarks of their respective
owners.

Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.

mysql>

测试nginx 是否能打开


[root@QKA169 html]# ps -ef | grep php-fpm
root  337433  1 0 18:03 ?  00:00:00 php-fpm: master process (/usr/local/php7/etc/php-fpm.conf)
nobody 337434 337433 0 18:03 ?  00:00:00 php-fpm: pool www
nobody 337435 337433 0 18:03 ?  00:00:00 php-fpm: pool www
root  337454 37888 0 18:12 pts/0 00:00:00 grep --color=auto php-fpm
[root@QKA169 html]# ps -ef | grep nginx
root  337400  1 0 18:01 ?  00:00:00 nginx: master process /usr/sbin/nginx -c /etc/nginx/nginx.conf
nginx  337401 337400 0 18:01 ?  00:00:00 nginx: worker process
root  337456 37888 0 18:13 pts/0 00:00:00 grep --color=auto nginx
[root@QKA169 html]# netstat -nalp | grep 80
tcp  0  0 0.0.0.0:80    0.0.0.0:*    LISTEN  337400/nginx: maste
tcp  0  0 192.168.1.69:80   192.168.6.6:54714  TIME_WAIT -    
tcp  0  0 192.168.1.69:80   192.168.6.6:54709  TIME_WAIT -
远程打开    
http://192.168.1.69/

来源:http://juestnow.blog.51cto.com/1515305/1883133

0
投稿

猜你喜欢

手机版 网站运营 asp之家 www.aspxhome.com