GridView自定义分页的四种存储过程
发布时间：2024-01-27 09:52:25
1. 为什么不使用GridView的默认分页功能
首先要说说为什么不用GridView的默认的分页功能，GridView控件并非真正知道如何获得一个新页面，它只是请求绑定的数据源控件返回适合规定页面的行，分页最终是由数据源控件完成。当我们使用SqlDataSource或使用以上的代码处理分页时。每次这个页面被请求或者回发时，所有和这个SELECT语句匹配的记录都被读取并存储到一个内部的DataSet中，但只显示适合当前页面大小的记录数。也就是说有可能使用Select语句返回1000000条记录，而每次回发只显示10条记录。如果启用了SqlDataSource上的缓存，通过把EnableCaching设置为true，则情况会更好一些。在这种情况下，我们只须访问一次数据库服务器，整个数据集只加载一次，并在指定的期限内存储在ASP.NET缓存中。只要数据保持缓存状态，显示任何页面将无须再次访问数据库服务器。然而，可能有大量数据存储在内存中，换而言之，Web服务器的压力大大的增加了。因此，如果要使用SqlDataSource来获取较小的数据时，GridView内建的自动分页可能足够高效了，但对于大数据量来说是不合适的。
2. 分页的四种存储过程(分页+排序的版本请参考Blog里其他文章)
在大多数情况下我们使用存储过程来进行分页，今天有空总结了一下使用存储过程对GridView进行分页的4种写法(分别是使用Top关键字，临时表，临时表变量和SQL Server 2005 新加的Row_Number()函数)
后续的文章中还将涉及GridView控件使用ObjectDataSource自定义分页 + 排序，Repeater控件自定义分页 + 排序，有兴趣的朋友可以参考。
if exists(select 1 from sys.objects where name = 'GetProductsCount' and type = 'P')
drop proc GetProductsCount
go
CREATE PROCEDURE GetProductsCount
as
select count(*) from products
go
--1.使用Top
if exists(select 1 from sys.objects where name = 'GetProductsByPage' and type = 'P')
drop proc GetProductsByPage
go
CREATE PROCEDURE GetProductsByPage
@PageNumber int,
@PageSize int
AS
declare @sql nvarchar(4000)
set @sql = 'select top ' + Convert(varchar, @PageSize)
+ ' * from products where productid not in (select top ' + Convert(varchar, (@PageNumber - 1) * @PageSize) + ' productid from products)'
exec sp_executesql @sql
go
--exec GetProductsByPage 1, 10
--exec GetProductsByPage 5, 10
--2.使用临时表
if exists(select 1 from sys.objects where name = 'GetProductsByPage' and type = 'P')
drop proc GetProductsByPage
go
CREATE PROCEDURE GetProductsByPage
@PageNumber int,
@PageSize int
AS
-- 创建临时表
CREATE TABLE #TempProducts
(
ID int IDENTITY PRIMARY KEY,
ProductID int,
ProductName varchar(40) ,
SupplierID int,
CategoryID int,
QuantityPerUnit nvarchar(20),
UnitPrice money,
UnitsInStock smallint,
UnitsOnOrder smallint,
ReorderLevel smallint,
Discontinued bit
)
-- 填充临时表
INSERT INTO #TempProducts
(ProductID, ProductName, SupplierID, CategoryID, QuantityPerUnit, UnitPrice, UnitsInStock, UnitsOnOrder, ReorderLevel, Discontinued)
SELECT ProductID, ProductName, SupplierID, CategoryID, QuantityPerUnit, UnitPrice, UnitsInStock, UnitsOnOrder, ReorderLevel, Discontinued
FROM Products
DECLARE @FromID int
DECLARE @ToID int
SET @FromID = ((@PageNumber - 1) * @PageSize) + 1
SET @ToID = @PageNumber * @PageSize
SELECT ProductID, ProductName, SupplierID, CategoryID, QuantityPerUnit, UnitPrice, UnitsInStock, UnitsOnOrder, ReorderLevel, Discontinued
FROM #TempProducts
WHERE ID >= @FromID AND ID <= @ToID
go
--exec GetProductsByPage 1, 10
--exec GetProductsByPage 5, 10
--3.使用表变量
/*
为要分页的数据创建一个table变量,这个table变量里有一个作为主健的IDENTITY列.这样需要分页的每条记录在table变量里就和一个row index(通过IDENTITY列)关联起来了.一旦table变量产生,连接数据库表的SELECT语句就被执行,获取需要的记录.SET ROWCOUNT用来限制放到table变量里的记录的数量.
当SET ROWCOUNT的值指定为PageNumber * PageSize时,这个方法的效率取决于被请求的页数.对于比较前面的页来说– 比如开始几页的数据– 这种方法非常有效. 但是对接近尾部的页来说,这种方法的效率和默认分页时差不多
*/
if exists(select 1 from sys.objects where name = 'GetProductsByPage' and type = 'P')
drop proc GetProductsByPage
go
CREATE PROCEDURE GetProductsByPage
@PageNumber int,
@PageSize int
AS
DECLARE @TempProducts TABLE
(
ID int IDENTITY,
productid int
)
DECLARE @maxRows int
SET @maxRows = @PageNumber * @PageSize
--在返回指定的行数之后停止处理查询
SET ROWCOUNT @maxRows
INSERT INTO @TempProducts (productid)
SELECT productid
FROM products
ORDER BY productid
SET ROWCOUNT @PageSize
SELECT p.*
FROM @TempProducts t INNER JOIN products p
ON t.productid = p.productid
WHERE ID > (@PageNumber - 1) * @PageSize
SET ROWCOUNT 0
GO
--exec GetProductsByPage 1, 10
--exec GetProductsByPage 5, 10
--4.使用row_number函数
--SQL Server 2005的新特性,它可以将记录根据一定的顺序排列,每条记录和一个等级相关 这个等级可以用来作为每条记录的row index.
if exists(select 1 from sys.objects where name = 'GetProductsByPage' and type = 'P')
drop proc GetProductsByPage
go
CREATE PROCEDURE GetProductsByPage
@PageNumber int,
@PageSize int
AS
select ProductID, ProductName, SupplierID, CategoryID, QuantityPerUnit, UnitPrice, UnitsInStock, UnitsOnOrder, ReorderLevel, Discontinued
from
(select row_number() Over (order by productid) as row,ProductID, ProductName, SupplierID, CategoryID, QuantityPerUnit, UnitPrice, UnitsInStock, UnitsOnOrder, ReorderLevel, Discontinued
from products) as ProductsWithRowNumber
where row between (@PageNumber - 1) * @PageSize + 1 and @PageNumber * @PageSize
go
--exec GetProductsByPage 1, 10
--exec GetProductsByPage 5, 10
3. 在GridView中的应用
<％@ Page Language="C#" AutoEventWireup="true" CodeFile="GridViewPaging.aspx.cs" Inherits="GridViewPaging" ％>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" >
<head runat="server">
<title>Paging</title>
</head>
<body>
<form id="form1" runat="server">
<div>
<asp:LinkButton id="lbtnFirst" runat="server" CommandName="First" OnCommand="lbtnPage_Command">|<</asp:LinkButton>
<asp:LinkButton id="lbtnPrevious" runat="server" CommandName="Previous" OnCommand="lbtnPage_Command"><<</asp:LinkButton>
<asp:Label id="lblMessage" runat="server" />
<asp:LinkButton id="lbtnNext" runat="server" CommandName="Next" OnCommand="lbtnPage_Command">>></asp:LinkButton>
<asp:LinkButton id="lbtnLast" runat="server" CommandName="Last" OnCommand="lbtnPage_Command">>|</asp:LinkButton>
转到第<asp:DropDownList ID="dropPage" runat="server" AutoPostBack="True" OnSelectedIndexChanged="dropPage_SelectedIndexChanged"></asp:DropDownList>页
<asp:GridView ID="GridView1" runat="server" AutoGenerateColumns="False" DataKeyNames="ProductID" DataSourceID="SqlDataSource1">
<Columns>
<asp:BoundField DataField="ProductID" HeaderText="ProductID" InsertVisible="False" ReadOnly="True" />
<asp:BoundField DataField="ProductName" HeaderText="ProductName" />
<asp:BoundField DataField="SupplierID" HeaderText="SupplierID" />
<asp:BoundField DataField="CategoryID" HeaderText="CategoryID" />
<asp:BoundField DataField="QuantityPerUnit" HeaderText="QuantityPerUnit" />
<asp:BoundField DataField="UnitPrice" HeaderText="UnitPrice" />
<asp:BoundField DataField="UnitsInStock" HeaderText="UnitsInStock" />
<asp:BoundField DataField="UnitsOnOrder" HeaderText="UnitsOnOrder" />
<asp:BoundField DataField="ReorderLevel" HeaderText="ReorderLevel" />
<asp:CheckBoxField DataField="Discontinued" HeaderText="Discontinued" />
</Columns>
</asp:GridView>
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="Data Source=.\sqlexpress;Initial Catalog=Northwind;Integrated Security=True" ProviderName="System.Data.SqlClient" SelectCommand="GetProductsByPage" SelectCommandType="StoredProcedure" OnSelecting="SqlDataSource1_Selecting" OnSelected="SqlDataSource1_Selected">
<SelectParameters>
<asp:Parameter Name="PageNumber" Type="Int32" />
<asp:Parameter Name="PageSize" Type="Int32" />
</SelectParameters>
</asp:SqlDataSource>
</div>
</form>
</body>
</html>
<％@ Page Language="C#" AutoEventWireup="true" CodeFile="GridViewPaging.aspx.cs" Inherits="GridViewPaging" ％>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" >
<head runat="server">
<title>Paging</title>
</head>
<body>
<form id="form1" runat="server">
<div>
<asp:LinkButton id="lbtnFirst" runat="server" CommandName="First" OnCommand="lbtnPage_Command">|<</asp:LinkButton>
<asp:LinkButton id="lbtnPrevious" runat="server" CommandName="Previous" OnCommand="lbtnPage_Command"><<</asp:LinkButton>
<asp:Label id="lblMessage" runat="server" />
<asp:LinkButton id="lbtnNext" runat="server" CommandName="Next" OnCommand="lbtnPage_Command">>></asp:LinkButton>
<asp:LinkButton id="lbtnLast" runat="server" CommandName="Last" OnCommand="lbtnPage_Command">>|</asp:LinkButton>
转到第<asp:DropDownList ID="dropPage" runat="server" AutoPostBack="True" OnSelectedIndexChanged="dropPage_SelectedIndexChanged"></asp:DropDownList>页
<asp:GridView ID="GridView1" runat="server" AutoGenerateColumns="False" DataKeyNames="ProductID" DataSourceID="SqlDataSource1">
<Columns>
<asp:BoundField DataField="ProductID" HeaderText="ProductID" InsertVisible="False" ReadOnly="True" />
<asp:BoundField DataField="ProductName" HeaderText="ProductName" />
<asp:BoundField DataField="SupplierID" HeaderText="SupplierID" />
<asp:BoundField DataField="CategoryID" HeaderText="CategoryID" />
<asp:BoundField DataField="QuantityPerUnit" HeaderText="QuantityPerUnit" />
<asp:BoundField DataField="UnitPrice" HeaderText="UnitPrice" />
<asp:BoundField DataField="UnitsInStock" HeaderText="UnitsInStock" />
<asp:BoundField DataField="UnitsOnOrder" HeaderText="UnitsOnOrder" />
<asp:BoundField DataField="ReorderLevel" HeaderText="ReorderLevel" />
<asp:CheckBoxField DataField="Discontinued" HeaderText="Discontinued" />
</Columns>
</asp:GridView>
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="Data Source=.\sqlexpress;Initial Catalog=Northwind;Integrated Security=True" ProviderName="System.Data.SqlClient" SelectCommand="GetProductsByPage" SelectCommandType="StoredProcedure" OnSelecting="SqlDataSource1_Selecting" OnSelected="SqlDataSource1_Selected">
<SelectParameters>
<asp:Parameter Name="PageNumber" Type="Int32" />
<asp:Parameter Name="PageSize" Type="Int32" />
</SelectParameters>
</asp:SqlDataSource>
</div>
</form>
</body>
</html>
using System;
using System.Data;
using System.Configuration;
using System.Collections;
using System.Web;
using System.Web.Security;
using System.Web.UI;
using System.Web.UI.WebControls;
using System.Web.UI.WebControls.WebParts;
using System.Web.UI.HtmlControls;
using System.Data.SqlClient;
public partial class GridViewPaging : System.Web.UI.Page
{
//每页显示的最多记录的条数
private int pageSize = 10;
//当前页号
private int currentPageNumber;
//显示数据的总条数
private static int rowCount;
//总页数
private static int pageCount;
protected void Page_Load(object sender, EventArgs e)
{
if (!IsPostBack)
{
SqlConnection cn = new SqlConnection(System.Configuration.ConfigurationManager.ConnectionStrings["NorthwindConnectionString"].ConnectionString);
SqlCommand cmd = new SqlCommand("GetProductsCount", cn);
cmd.CommandType = CommandType.StoredProcedure;
cn.Open();
rowCount = (int)cmd.ExecuteScalar();
cn.Close();
pageCount = (rowCount - 1) / pageSize + 1;
currentPageNumber = 1;
ViewState["currentPageNumber"] = currentPageNumber;
lbtnPrevious.Enabled = false;
lbtnFirst.Enabled = false;
for (int i = 1; i <= pageCount; i++)
{
dropPage.Items.Add(new ListItem(i.ToString(), i.ToString()));
}
dropPage.SelectedValue = dropPage.Items.FindByValue(currentPageNumber.ToString()).Value;
SqlDataSource1.Select(DataSourceSelectArguments.Empty);
}
}
protected void SqlDataSource1_Selecting(object sender, SqlDataSourceSelectingEventArgs e)
{
SqlDataSource1.SelectParameters["PageNumber"].DefaultValue = currentPageNumber.ToString();
SqlDataSource1.SelectParameters["PageSize"].DefaultValue = pageSize.ToString();
}
protected void SqlDataSource1_Selected(object sender, SqlDataSourceStatusEventArgs e)
{
lblMessage.Text = "共找到" + rowCount + "条记录, 当前第" + currentPageNumber + "/" + pageCount + "页";
}
protected void lbtnPage_Command(object sender, CommandEventArgs e)
{
switch (e.CommandName)
{
case "First":
currentPageNumber = 1;
break;
case "Previous":
currentPageNumber = (int)ViewState["currentPageNumber"] - 1 > 1 ? (int)ViewState["currentPageNumber"] - 1 : 1;
break;
case "Next":
currentPageNumber = (int)ViewState["currentPageNumber"] + 1 < pageCount ? (int)ViewState["currentPageNumber"] + 1 : pageCount;
break;
case "Last":
currentPageNumber = pageCount;
break;
}
dropPage.SelectedValue = dropPage.Items.FindByValue(currentPageNumber.ToString()).Value;
ViewState["currentPageNumber"] = currentPageNumber;
SetButton(currentPageNumber);
SqlDataSource1.Select(DataSourceSelectArguments.Empty);
}
private void SetButton(int currentPageNumber)
{
lbtnFirst.Enabled = currentPageNumber != 1;
lbtnPrevious.Enabled = currentPageNumber != 1;
lbtnNext.Enabled = currentPageNumber != pageCount;
lbtnLast.Enabled = currentPageNumber != pageCount;
}
protected void dropPage_SelectedIndexChanged(object sender, EventArgs e)
{
currentPageNumber = int.Parse(dropPage.SelectedValue);
ViewState["currentPageNumber"] = currentPageNumber;
SetButton(currentPageNumber);
SqlDataSource1.Select(DataSourceSelectArguments.Empty);
}
}
[/code]
using System;
using System.Data;
using System.Configuration;
using System.Collections;
using System.Web;
using System.Web.Security;
using System.Web.UI;
using System.Web.UI.WebControls;
using System.Web.UI.WebControls.WebParts;
using System.Web.UI.HtmlControls;
using System.Data.SqlClient;
public partial class GridViewPaging : System.Web.UI.Page
{
//每页显示的最多记录的条数
private int pageSize = 10;
//当前页号
private int currentPageNumber;
//显示数据的总条数
private static int rowCount;
//总页数
private static int pageCount;
protected void Page_Load(object sender, EventArgs e)
{
if (!IsPostBack)
{
SqlConnection cn = new SqlConnection(System.Configuration.ConfigurationManager.ConnectionStrings["NorthwindConnectionString"].ConnectionString);
SqlCommand cmd = new SqlCommand("GetProductsCount", cn);
cmd.CommandType = CommandType.StoredProcedure;
cn.Open();
rowCount = (int)cmd.ExecuteScalar();
cn.Close();
pageCount = (rowCount - 1) / pageSize + 1;
currentPageNumber = 1;
ViewState["currentPageNumber"] = currentPageNumber;
lbtnPrevious.Enabled = false;
lbtnFirst.Enabled = false;
for (int i = 1; i <= pageCount; i++)
{
dropPage.Items.Add(new ListItem(i.ToString(), i.ToString()));
}
dropPage.SelectedValue = dropPage.Items.FindByValue(currentPageNumber.ToString()).Value;
SqlDataSource1.Select(DataSourceSelectArguments.Empty);
}
}
protected void SqlDataSource1_Selecting(object sender, SqlDataSourceSelectingEventArgs e)
{
SqlDataSource1.SelectParameters["PageNumber"].DefaultValue = currentPageNumber.ToString();
SqlDataSource1.SelectParameters["PageSize"].DefaultValue = pageSize.ToString();
}
protected void SqlDataSource1_Selected(object sender, SqlDataSourceStatusEventArgs e)
{
lblMessage.Text = "共找到" + rowCount + "条记录, 当前第" + currentPageNumber + "/" + pageCount + "页";
}
protected void lbtnPage_Command(object sender, CommandEventArgs e)
{
switch (e.CommandName)
{
case "First":
currentPageNumber = 1;
break;
case "Previous":
currentPageNumber = (int)ViewState["currentPageNumber"] - 1 > 1 ? (int)ViewState["currentPageNumber"] - 1 : 1;
break;
case "Next":
currentPageNumber = (int)ViewState["currentPageNumber"] + 1 < pageCount ? (int)ViewState["currentPageNumber"] + 1 : pageCount;
break;
case "Last":
currentPageNumber = pageCount;
break;
}
dropPage.SelectedValue = dropPage.Items.FindByValue(currentPageNumber.ToString()).Value;
ViewState["currentPageNumber"] = currentPageNumber;
SetButton(currentPageNumber);
SqlDataSource1.Select(DataSourceSelectArguments.Empty);
}
private void SetButton(int currentPageNumber)
{
lbtnFirst.Enabled = currentPageNumber != 1;
lbtnPrevious.Enabled = currentPageNumber != 1;
lbtnNext.Enabled = currentPageNumber != pageCount;
lbtnLast.Enabled = currentPageNumber != pageCount;
}
protected void dropPage_SelectedIndexChanged(object sender, EventArgs e)
{
currentPageNumber = int.Parse(dropPage.SelectedValue);
ViewState["currentPageNumber"] = currentPageNumber;
SetButton(currentPageNumber);
SqlDataSource1.Select(DataSourceSelectArguments.Empty);
}
}
[/code]
4.分页效果图:
0
投稿猜你喜欢
pycharm设置Console控制台输出自动换行解决方法File --> Settings… --> E- 前言激活函数在机器学习中常常用在神经网络隐含层节点与神经网络的输出层节点上，激活函数的作用是赋予神经网络更多的非线性因素，如果不用激励函数，
- 使用consul四大特性1. 服务发现：利用服务注册，服务发现功能来实现服务治理。2. 健康检查：利用consul注册的检查检查函数或脚本来
- 错误信息: RuntimeError: in-place operations can be only used on variables
- 通过jsonp简单获取接口数据，对了，注意下jsonp方法会自动添加callback<template><div clas
- 我们在编写asp程序时经常会使用到这个功能，一般我们这样判断如：if a="" then ,而这个函数考虑的就比较全面了
- 一 导言设计一个好的用户系统往往不是那么容易，Django提供的用户系统可以快速实现基本的功能，并可以在此基础上继续扩展以满足我们的需求。先
- 本文用到的文件的下载地址百度网盘链接: https://pan.baidu.com/s/1tmpdEfAZKff5TOMAitUXqQ提取码
- python配置matlab库1、确认配置版本matlab与python有相互对应的版本，需要两者版本兼容。如不兼容，需要调整matlab版
- 目录用Python写一个简单的通讯录一、构思1、定义空列表和一个空字典来存储2、定义功能选项3、添加通讯录功能4、 循环，调用所有的函数功能
- 描述max() 方法返回给定参数的最大值，参数可以为序列。语法以下是 max() 方法的语法:max( x, y, z, .... )参数x
- 像素是计算机视觉中图像的重要属性。它们是表示图像 * 定空间中光的颜色强度的数值，是图像中数据的最小单位。图像中的像素总数是高度、宽度和通道的
- 本地项目配置1 复制 luffy/settings/dev.py为prop.py修改luffy/settings/prop.py中以下几项(
- 1、pyecharts绘制饼图（显示百分比）# 导入模块from pyecharts import options as optsfrom
- 存储过程简介----------------------------------------------------------------
- 兼容IE6的第一步就是单独对IE进行兼容，你针对IE6所写的代码只影响IE6；有几种方法可以区分开IE6：IE特有条件注释、CSS选择器、J
- 英文文档：class type(object)class type(name, bases, dict)With one argument,
- 引言这算是一个高级用法了，前面我们只说到对类型、变量的几种反射的用法，包括如何获取其值、其类型、以及如何重新设置新值。但是在项目应用中，另外
- 在一个群上看到好几次问到call和apply的作用，function这两个方法的效果大家都很容易理解，但一般很难让人深刻地理解使用它们的时机
- 代码为：import matplotlib.pyplot as plt #用于显示图片import matplotlib.image as
