Python的shutil模块中文件的复制操作函数详解
作者:lucifercn 发布时间:2023-04-13 16:59:22
copy()
chutil.copy(source, destination)
shutil.copy() 函数实现文件复制功能,将 source 文件复制到 destination 文件夹中,两个参数都是字符串格式。如果 destination 是一个文件名称,那么它会被用来当作复制后的文件名称,即等于 复制 + 重命名。举例如下:
>> import shutil
>> import os
>> os.chdir('C:\\')
>> shutil.copy('C:\\spam.txt', 'C:\\delicious')
'C:\\delicious\\spam.txt'
>> shutil.copy('eggs.txt', 'C:\\delicious\\eggs2.txt')
'C:\\delicious\\eggs2.txt'
如代码所示,该函数的返回值是复制成功后的字符串格式的文件路径。
copyfile()
copyfile()将源的内容复制给目标,如果没有权限写目标文件则产生IoError
from shutil import *
from glob import glob
print 'BEFORE:', glob('huanhuan.*')
copyfile('huanhuan.txt', 'huanhuan.txt.copy')
print 'AFTER:', glob('huanhuan.*')
这个函数会打开输入文件进行读写,而不论其类型,所以某些特殊文件不可以用copyfile()复制为新的特殊文件。
>>> ================================ RESTART ================================
>>>
BEFORE: ['huanhuan.txt']
AFTER: ['huanhuan.txt', 'huanhuan.txt.copy']
copyfile()实际是使用了底层函数copyfileobj()。copyfile()的参数是文件名,copyfileobj()的参数是打开的文件句柄。第三个参数可选,用于读入块的缓冲区长度。
from shutil import *
import os
from StringIO import StringIO
import sys
class VerboseStringIO(StringIO):
def read(self, n=-1):
next = StringIO.read(self, n)
print 'read(%d) bytes' % n
return next
lorem_ipsum = '''This makes the dependency explicit, limits the scope to the current file and provides faster access to the bit.* functions, too.
It's good programming practice not to rely on the global variable bit being set (assuming some other part of your application has already loaded the module).
The require function ensures the module is only loaded once, in any case.'''
print 'Defalut:'
input = VerboseStringIO(lorem_ipsum)
output = StringIO()
copyfileobj(input, output)
print 'All at once:'
input = VerboseStringIO(lorem_ipsum)
output = StringIO()
copyfileobj(input, output, -1)
print 'Blocks of 256:'
input = VerboseStringIO(lorem_ipsum)
output = StringIO()
copyfileobj(input, output, 256)
默认行为是使用大数据块读取。使用-1会一次性读取所有输入,或者使用其他正数可以设置特定块的大小。
>>> ================================ RESTART ================================
>>>
Defalut:
read(16384) bytes
read(16384) bytes
All at once:
read(-1) bytes
read(-1) bytes
Blocks of 256:
read(256) bytes
read(256) bytes
read(256) bytes
类似于UNIX命令行工具cp,copy()函数会用同样的方式解释输出名。如果指定的目标指示一个目录而不是一个文件,会使用源文件的基名在该目录中创建一个新文件。
from shutil import *
import os
dir = os.getcwd()
if not os.path.exists('%s\\example' % dir):
os.mkdir('%s\\example' % dir)
print 'BEFORE:', os.listdir('example')
copy('huanhuan.txt', 'example')
print 'AFTER:', os.listdir('example')
>>> ================================ RESTART ================================
>>>
BEFORE: []
AFTER: ['huanhuan.txt']
copy2()
copy2()工作类似copy(),不过复制到新文件的元数据会包含访问和修改时间。
from shutil import *
import os
import time
dir = os.getcwd()
if not os.path.exists('%s\\example' % dir):
os.mkdir('%s\\example' % dir)
def show_file_info(filename):
stat_info = os.stat(filename)
print '\tMode :', stat_info.st_mode
print '\tCreated :', time.ctime(stat_info.st_ctime)
print '\tAccessed:', time.ctime(stat_info.st_atime)
print '\tModified:', time.ctime(stat_info.st_mtime)
print 'SOURCE:'
show_file_info('huanhuan.txt')
copy2('huanhuan.txt', 'example')
print 'DEST:'
show_file_info('%s\\example\\huanhuan.txt' % dir)
文件特性和原文件完全相同。
>>> ================================ RESTART ================================
>>>
SOURCE:
Mode : 33206
Created : Thu Feb 13 17:42:46 2014
Accessed: Thu Feb 13 17:42:46 2014
Modified: Thu Feb 13 17:42:46 2014
DEST:
Mode : 33206
Created : Thu Feb 13 18:29:14 2014
Accessed: Thu Feb 13 17:42:46 2014
Modified: Thu Feb 13 17:42:46 2014
复制文件元数据
在UNIX创建一个新文件,会根据当前用户的umask接受权限。要把权限从一个文件复制到另一个文件,可以使用copymode()。
from shutil import *
import os
from commands import *
with open('file_to_change.txt', 'wt') as f:
f.write('i love you')
os.chmod('file_to_change.txt', 0444)
print 'BEFORE:'
print getstatus('file_to_change.txt')
copymode('shutil_copymode.py', 'file_to_change.txt')
print 'AFTER:'
print getstatus('file_to_change.txt')
要复制其他元数据,可以使用copystat()。
from shutil import *
import os
import time
def show_file_info(filename):
stat_info = os.stat(filename)
print '\tMode :', stat_info.st_mode
print '\tCreated :', time.ctime(stat_info.st_ctime)
print '\tAccessed :', time.ctime(stat_info.st_atime)
print '\tModified :', time.ctime(stat_info.st_mtime)
with open('file_to_change.txt', 'wt') as f:
f.write('i love you')
os.chmod('file_to_Change.txt', 0444)
print 'BEFORE:'
show_file_info('file_to_Change.txt')
copystat('shutil_copystat.py', 'file_to_Change.txt')
print 'AFTER:'
show_file_info('file_to_Change.txt')
使用copystat()只会复制与文件关联的权限和日期。
处理目录树
shutil包含三个函数处理目录树。要把一个目录从一个位置复制到另一个位置,使用copytree()。这会递归遍历源目录树,将文件复制到目标。
copytree()可以将当前这个实现当作起点,在使用前要让它更健壮,可以增加一些特性,如进度条。
from shutil import *
from commands import *
print 'BEFORE:'
print getoutput('ls -rlast /tmp/example')
copytree('../shutil', '/tmp/example')
print '\nAFTER:'
print getoutput('ls -rlast /tmp/example')
symlinks参数控制着符号链接作为链接复制还是文件复制。默认将内容复制到新文件,如果选项为true,会在目标中创建新的符号链接。
要删除一个目录及其内容,可以使用rmtree()。
from shutil import *
from commands import *
print 'BEFORE:'
print getoutput('ls -rlast /tmp/example')
rmtree('/tmp/example')
print '\nAFTER:'
print getoutput('ls -rlast /tmp/example')
将一个文件或目录从一个位置移动到另一个位置,可以使用move()。
from shutil import *
from glob import glob
with open('example.txt', 'wt') as f:
f.write('i love you')
print 'BEFORE: ', glob('example*')
move('example.txt', 'example.out')
print 'AFTER: ',glob('example*')
其语义与UNIX命令mv类似。如果源与目标都在同一个文件系统内,则会重命名源文件。否则,源文件会复制到目标文件,将源文件删除。
>>> ================================ RESTART ================================
>>>
BEFORE: ['example', 'example.txt']
AFTER: ['example', 'example.out']
猜你喜欢
- 由于下学期报了一个Python的入门课程所以寒假一直在自己摸索,毕竟到时候不能挂科,也是水水学分最近心血来潮打算试试爬一下百度翻译肝了一天终
- 环境:Ubuntu14.04,tensorflow=1.4(bazel源码安装),Anaconda python=3.6声明变量主要有两种方
- 本文主要给大家讲解了Apriori算法的基础知识以及Apriori算法python中的实现过程,以下是所有内容:1. Apriori算法简介
- 1.类方法类方法是从属于"类对象"的方法。类对象可以通过装饰器@classmethod来定义,具体格式如下:@class
- 想使用正则表达式来获取一段文本中的任意字符,写出如下匹配规则: (.*) 结果运行之后才发现,无法获得换行之后的文本。于是查了一下手册,才发
- sql exist的妙用create table b(a varchar(10),b varchar(10),c varchar(10))i
- 前言虽然Python的标准库中 urllib2 模块已经包含了平常我们使用的大多数功能,但是它的 API 使用起来让人感觉不太好,而 Req
- 本文实例为大家分享了Django文件上传与下载的具体代码,供大家参考,具体内容如下Django1.4首先是上传:#settings.pyME
- 由于最近有个任务需要在python环境下跑,项目是python3.6 + tensorflow1.3.1.现总结安装环境:卸载Python3
- 本文介绍了python十进制和二进制的转换方法(含浮点数),分享给大家,也给自己留个笔记,具体如下:我终于写完了 , 十进制转二进制的小数部
- pandas代码如下:import pandas as pdimport numpy as npsalaries = pd.DataFram
- 1.网络爬虫的基本概念网络爬虫(又称网络蜘蛛,机器人),就是模拟客户端发送网络请求,接收请求响应,一种按照一定的规则,自动地抓取互联网信息的
- 1、XML 是什么?XML仅仅是一种数据存放格式,这种格式是一种文本(虽然XML规范中也提供了存放二进制数据的解决方案)。事实上有很多文本格
- 大家都熟悉迅雷看看里面的电影人气指数这个小图标吧先看看我的效果图再看看迅雷的截图比较好看,是根据电影的人气指数来显示热度,下面我们就来模仿一
- 简单的学习下利用socket来建立客户端和服务端之间的连接并且发送数据1. 客户端socketClient.py代码import socke
- 1、正则表达式包括两部分①定义正则表达式的规则;②正则表达式的模式(i/g/m);2、声明正则表达式① 字面量声明: var reg = /
- 平时我们获取事件对象一般写法如下:function getEvent(event) { return event
- 一、基础内容安装第三方库的时候安装:python-docxfrom docx import DocumentPt - 像素、Cm - 厘米、
- Python 是面向对象的语言,所以程序抛出的异常也是类。常见的异常类1.NameError:尝试访问一个没有申明的变量2.ZeroDivi
- 1. 基本环境安装 anaconda 环境, 由于国内登陆不了他的官网 https://www.continuum.io/downloads